[huzionet]

Hello colleagues, I am looking for an idea how to activate LDW in F07, car has KAFAS and working Speed Limit Info and High Beam Assistant. Do I need an FSC code to run LDW?
Car from 03.2012

Best Regards.

[jararak]

if car is with CIC(non nbt), you don't need FSC for this assistant.

simply add 5AD to VO, than recode. but you will need also vibration steering wheel - without error appears in istaD

[huzionet]

if car is with CIC(non nbt), you don't need FSC for this assistant.

simply add 5AD to VO, than recode. but you will need also vibration steering wheel - without error appears in istaD

Hello, yes cic, And you know which ECU to encode, the steering wheel is vibrating and after calling it, istaD vibrates.

Best Regards.

[Fx82]

You also need to add a button to switch it on or off.

[jararak]

You also need to add a button to switch it on or off.

not needed - it is possible to set auto ON

units which have to be encoded - Kafas, FRM, Kombi, CIC and I think also SZL

[huzionet]

Hello, thank you for the answers, the button is already mounted, and I used this instruction for coding

KAFAS:
3000, TLC_START_VERSION, default_on
3000, TLC_ON_OFF, aktiv
3000, SEND_MESSAGE_327, aktiv
3000, SEND_MESSAGE_345, aktiv
3006, ACTUATOR_ON_OFF, aktiv

KOMBI:
3003, TLC_VERBAUT, aktiv
3004, ST_TLC_TIMEOUT, aktiv
3004, ST_TLC_ALIVE, aktiv
3004, ST_TLC_APPL, aktiv

HU_CIC:
3001, LANE_DEPARTURE_WARNING, aktiv

SZL_LWS:
3000, Lenkrad_Vibration, aktiv

but it still does not work.

Best regards.

---

...and interestingly, after encoding CIC does not appear in the menu LANE_DEPARTURE_WARNING.

[Krysiaman]

Why didn't you FDL code modules that jararak wrote? It is easier and faster

[Gizmo520d]

Check the following settings..
ICMQL > Daten 3000 > HcKoHa_i_CPar_Fkt_Aktiv = aktiv
ICMQL > Daten 3000 > HcKoHa_i_CPar_TLC_verbaut = verbaut

FRM__03CT > FRM_VERBAU_U_ALLGEMEIN 3000 > LIN_PUBU_TLC = aktiv