Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ F20 FEM issue after ISTA+ programming
12-03-2019, 09:17 AM,
(This post was last modified: 12-03-2019, 15:16 PM by Clusters.)
Post: #1
|
|||
|
|||
F20 FEM issue after ISTA+ programming
Hello all,
We've run update procedure with ISTA+ with ICOM NEXT on ZGW module and i dont know why ZGW stop flashing. The process was aborted and car was strange inoperative - dash illuminated, tail lights and when tried to switch to ignition. Actually it is not possible to switch to ignition. i dont have read before with esys, and now i cant flash with it. i need help from ESYS specialist regards |
|||
12-03-2019, 10:08 AM,
Post: #2
|
|||
|
|||
RE: F20 FEM issue after ISTA+ programming
connect with can protocol, and check zgw respond with tool32
BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
12-03-2019, 10:12 AM,
Post: #3
|
|||
|
|||
RE: F20 FEM issue after ISTA+ programming
(12-03-2019, 10:08 AM)duckdonald Wrote: connect with can protocol, and check zgw respond with tool32 hi, with tool32 i have not try, with eys i get a similar to this picture |
|||
12-03-2019, 10:35 AM,
Post: #4
|
|||
|
|||
RE: F20 FEM issue after ISTA+ programming
software update not complete,..
Try with esys, flash only FEM_GW BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
Reputation: +1 - rasmoka [+1] | |||
12-03-2019, 10:36 AM,
Post: #5
|
|||
|
|||
RE: F20 FEM issue after ISTA+ programming
your FEM is in Programming mode , with Esys can easily flash it and recover FEM .
those UNKNOWN items can be manually renamed so that Esys knows what software to load in it . I have faced such issue with FEM , first I was scared to death as the car was completely dead and no Ignition response but then with Esys I have managed to recover the FEM and bring it back to life . Don't you have a saved SVT of this car so that you can get those UNKNOWN items in the list back to its real name .? |
|||
12-03-2019, 10:39 AM,
Post: #6
|
|||
|
|||
RE: F20 FEM issue after ISTA+ programming
|
|||
12-03-2019, 10:40 AM,
Post: #7
|
|||
|
|||
RE: F20 FEM issue after ISTA+ programming
give me team viewer , I will fix it for you .
PM me the info |
|||
Reputation: +1 - tigre [+1] | |||
12-03-2019, 12:07 PM,
(This post was last modified: 12-03-2019, 12:09 PM by tigre.)
Post: #8
|
|||
|
|||
RE: F20 FEM issue after ISTA+ programming
emhtuning
solved the problem |
|||
12-03-2019, 12:08 PM,
Post: #9
|
|||
|
|||
RE: F20 FEM issue after ISTA+ programming
|
|||
Reputation: +3 - claw [+1] , Gregor [+1] , rasmoka [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content