Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Megane 3 column lock fault
14-03-2019, 19:15 PM,
Post: #1
|
|||
|
|||
Megane 3 column lock fault
Hi all. 62 plate megane 3 with a fault relating to column lock. Clip states after ign feed missing. The feed (yellow wire) according to wiring diagram comes from UPC via a 10 amp fuse - yet its not at the lock. However by adding my own 12v to the lock still has a problem. I have bypassed the lock with a emulator just to rule out the lock. Apart from an earth to the lock all other wires including multiplex goes to the UCH. Anybody had anything similar ?
Thanks steve |
|||
14-03-2019, 20:06 PM,
Post: #2
|
|||
|
|||
RE: Megane 3 column lock fault
What fault codes you have ?
|
|||
16-03-2019, 19:24 PM,
Post: #3
|
|||
|
|||
RE: Megane 3 column lock fault
|
|||
01-05-2019, 03:42 AM,
Post: #4
|
|||
|
|||
RE: Megane 3 column lock fault
if you made sure that the feeds are correct, remove the module, uncover, (replace) or perform maintenance. the screws are in reverse.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content