[Impac]

I had a shop send me these faults from Autel and asked if this can be fixed, car was in accident all they said they replaced sensors and cameras no modules were replaced 

1) for SZL faults does that mean all it needs is default coding SZL with Esys? 

2) for cameras there is a fault saying NOT CONNECTED but they told me they got all cameras replaced or at least the once that were damaged and they checked the connections and everything is connected , so does that mean that all it needs is calibration with ista + ? 

Thank you for any help

[oceandiver86]

Hi,
1) Yes recode the SZL with esys and align the steering etc. with ISTA afterwards. If the unit comes from a different chassis etc, it maybe needs to be flashed as well.

2) try to re-learn the tope view cameras with ISTA service functions, most likely the problems are gone after that, if not you need to diagnose the top view system with ISTA.

3) you also have a issue in the airbag ecu...

[Impac]

Thank you gor quick reply, yes i forgo about the airbag, can that be fixed ? I mean with esys, ista ? Or acsm module needs to be repaired or replaced ?