Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ODIS-E and VAS5054 doesn't want to flash ECU
16-03-2019, 17:15 PM,
Post: #1
ODIS-E and VAS5054 doesn't want to flash ECU
Hi,

please help me with my problem with ODIS-E with VAS5054 kabel.
I use Odis-E 5.0.14 or ODIS-E 6.2.2 and with both verison I have the same problem with flashing ECU. All other function works like a charm but when I want flash ECU I always get error.
I choose a file, file is loaded OK, I press flash ECU and after a few seconds job is done with 100% but flashing is incompleted. 
please help me, where is the problem? 

thanks for help
Quote this message in a reply
16-03-2019, 17:32 PM, (This post was last modified: 16-03-2019, 17:33 PM by apoelistas.)
Post: #2
RE: ODIS-E and VAS5054 doesn't want to flash ECU
Photo of your diagnostic?? Internal board photos may also help.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
16-03-2019, 19:21 PM,
Post: #3
RE: ODIS-E and VAS5054 doesn't want to flash ECU
Here are photos of board of my VAS5054a. You think that my problem is wrong cable?


Attached Files Thumbnail(s)
           
Quote this message in a reply
16-03-2019, 19:37 PM,
Post: #4
RE: ODIS-E and VAS5054 doesn't want to flash ECU
If you using BT, try USB instead. What ecu and witch file are you using?
Quote this message in a reply
16-03-2019, 19:55 PM, (This post was last modified: 16-03-2019, 19:56 PM by vopi.)
Post: #5
RE: ODIS-E and VAS5054 doesn't want to flash ECU
I use USB connection only.
I try to flash engine ECU EDC17C46 with actual SW 03L906018RQ_9977
I tried to flash with older one 03L906018RQ_5408 and with newer SW 03L906018RQ_9980 but everytime with the same result.

here is log file after aborted flashing


Attached Files
Ergebnisprotokoll.html
File Type: .html
Downloaded: 46 times
Size: 19.19 KB

Quote this message in a reply
16-03-2019, 23:24 PM,
Post: #6
RE: ODIS-E and VAS5054 doesn't want to flash ECU
Have a similar clone. You should be able to flash if installed correctly. Not sure why you can not. Becareful, Needs rework before flashing.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
20-03-2019, 08:11 AM,
Post: #7
RE: ODIS-E and VAS5054 doesn't want to flash ECU
(16-03-2019, 23:24 PM)apoelistas Wrote:  Have a similar clone. You should be able to flash if installed correctly. Not sure why you can not.  Becareful, Needs rework before flashing.

OK, please tell me what I have to do. How I can rework my cable??
thanks
Quote this message in a reply
20-03-2019, 12:52 PM, (This post was last modified: 24-03-2019, 15:09 PM by apoelistas.)
Post: #8
RE: ODIS-E and VAS5054 doesn't want to flash ECU
https://cartechnology.co.uk/showthread.php?tid=30269

"At apoelitstas, “2 chip/resistors between the 2 memories” are actualy capacitors, also one voltage regulator needs to be soldered and chip A1040 has to be TJA1050, and if it after the test doest get “OK” it has to change A5780A chip as may not be original.

Ram chips are 5V so  ok but slower than 10ns

Here is mine with comments. (Post 262)
https://cartechnology.co.uk/showthread.p...53&page=27

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
24-04-2019, 21:53 PM,
Post: #9
RE: ODIS-E and VAS5054 doesn't want to flash ECU
Today I tried to flash again but DSG AG7 in Skoda Yeti 2011 and everything worked fine!!!
After that I tried Engine ECU and still the same problem!!

Why I can flash another ECU than Engine?? is it problem of protocol?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ODIS-Service_update_23_0_1-EU_20240326_Postsetup_230001.105.1210_test Tadk 275 16,486 3 minutes ago
Last Post: Tadk
0Scope ODIS-Service 7.2.1 Postsetup 4080 (test) Tadk 1,019 97,690 8 minutes ago
Last Post: Tadk
Lamborghini ODIS Service 23.2.2 + Activations justdiag 49 2,729 Yesterday, 18:32 PM
Last Post: billyleon
  How to identify flash file name for each steering assist anass_f 2 39 Yesterday, 13:24 PM
Last Post: anass_f
0Scope ODIS-Engineering 12.2 Postsetup 1060 (test) Tadk 260 33,320 Yesterday, 08:58 AM
Last Post: Versus
ZTAudi Audi A6 2024 seat belt warning deactivate with odis samiralena 3 120 Yesterday, 06:58 AM
Last Post: samiralena
  5NA920791C SW 4191 flash needed david99 6 635 27-03-2024, 21:40 PM
Last Post: zvonexp
ZVW Virtual Cluster Flash SD-files Mex165 56 5,733 25-03-2024, 13:17 PM
Last Post: esteticu
ZSkoda 5Q0614517AQ flash balard12 1 493 25-03-2024, 11:43 AM
Last Post: clc79
0Scope ODIS JVM/JRE STARTUP ERROR FIX DavidForgac 1 567 25-03-2024, 06:50 AM
Last Post: wxhank

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content