Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Why NBT flash so long ?
21-03-2019, 14:14 PM,
Post: #1
|
|||
|
|||
Why NBT flash so long ?
Hi,
Tried to flash NBT on bench with ENET for the 1st time but i dont know why it take so long. 2 hours past but i still in installing swfl and progress take so long. I think with this flashing speed, it may take one day to complete Can i stop it now ? Why it take so long ? |
|||
21-03-2019, 14:29 PM,
Post: #2
|
|||
|
|||
RE: Why NBT flash so long ?
why you keep making new threads for every single basic question ..
the forum is full of information , this basic subject have been covered in one thousands other threads ,, how hard is to use the search box on the top ??.. |
|||
21-03-2019, 14:31 PM,
Post: #3
|
|||
|
|||
RE: Why NBT flash so long ?
It is almost certainly flashing over the CAN bus rather than over Ethernet check the OABR to ZGW connections. You can cancel the flash as long as it is not processing the boot loader.
Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
Reputation: +2 - rickynguyen [+1] , huk_00 [+1] | |||
21-03-2019, 14:35 PM,
Post: #4
|
|||
|
|||
RE: Why NBT flash so long ?
(21-03-2019, 14:31 PM)pshoey Wrote: It is almost certainly flashing over the CAN bus rather than over Ethernet check the OABR to ZGW connections. You can cancel the flash as long as it is not processing the boot loader.But NBT not have OABR connector like EVO mate ? |
|||
21-03-2019, 16:25 PM,
(This post was last modified: 21-03-2019, 16:25 PM by pshoey.)
Post: #5
|
|||
|
|||
RE: Why NBT flash so long ?
Ok Ok - so ignore my OABR comment, my bad, multi-tasking again - but it is still an Ethernet issue and for NBT it is just on the quadlock instead.
Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
21-03-2019, 17:30 PM,
(This post was last modified: 21-03-2019, 17:31 PM by rickynguyen.)
Post: #6
|
|||
|
|||
RE: Why NBT flash so long ?
I found this, wire like diagram to get flashing thru ENET ?
|
|||
21-03-2019, 17:58 PM,
Post: #7
|
|||
|
|||
RE: Why NBT flash so long ?
Yes you can use that schema.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
21-03-2019, 20:03 PM,
Post: #8
|
|||
|
|||
RE: Why NBT flash so long ?
99.99% there are problem on your bench wiring, it should show "performEcuFlash started with protocol HTTP" on swfl/iba flashing, and not UDS.
update NBT with UDS will spend a week |
|||
22-03-2019, 14:18 PM,
(This post was last modified: 22-03-2019, 14:31 PM by rickynguyen.)
Post: #9
|
|||
|
|||
RE: Why NBT flash so long ?
Problem solved, not wiring problems, just choose correct option before flash
(21-03-2019, 20:03 PM)simonchs Wrote: 99.99% there are problem on your bench wiring, it should show "performEcuFlash started with protocol HTTP" on swfl/iba flashing, and not UDS.Youre wrong |
|||
22-03-2019, 17:20 PM,
Post: #10
|
|||
|
|||
RE: Why NBT flash so long ?
Nice, we’re wrong, thanks for letting us know we are overestimated your level.
And congratulation that you flash it by default settings successfully. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content