[lucidivo]

hey guys, 

I wanna know how do I found out. which SWFL file I should use on the Fem body because I think im missing one? because im stuck my FEM body has one file that says UNKNOWN. And I think that's the problem why I cant start anymore the car (F30) and it is also missing a cafd file. 

see attachment for what I mean, 

thanks in regard.

[duckdonald]

if this is due to an update gone wrong, .. it is better to try to update again, .. (eliminating from the TAL those already done, if you use esys)

[lucidivo]

if this is due to an update gone wrong, .. it is better to try to update again, .. (eliminating from the TAL those already done, if you use esys)

Well this happend where it was updating with ista+. A friend of didnt watcht his feets and felt over the cable and then ripped out. But i cant get ignition anymore. If i now try to read it with ista it thinks the Kl15 is off

[____ANGEL___]

so jump pin 16 and pin 1 in obd

[lucidivo]

so jump pin 16 and pin 1 in obd

why pin 1? if i look in the wiring diagram pin 1 is not even occupied. pin 16 is the + but nothing on pin 1

[____ANGEL___]

sorry, dealing as E series but is an F series, my fault!

pin 1 A173*1B to pin 13 A173*2B on fem will activate kl15 on f30

please provide vin for correctness

[lucidivo]

Did found it out, its all good now