Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
RCD 510 death after reading code on bench Nec + 95128
23-03-2019, 13:49 PM,
Post: #1
|
|||
|
|||
RCD 510 death after reading code on bench Nec + 95128
Radio 3C0 035 195A
Nec + 95128 its very popular for me on bench ... Today i try as usually read code, connected all cables after reading code , reboot so all good. So i power up , try code. work ok. Disconnected main power cable , programming box undersold cable , and radio die ...no power consumption at all ...0.00A I try find some short or damage part but no luck .. eeprom its ok. i can read data and have 3v maybe someone have same problem and solved that im open for any suggestions Thx Today i have other rcd510 on s29gl128 and RNS310 read code whiteout any hassle so box and cables are good. Please Click On Thanks & Rep..... if My Post Was helpful
|
|||
27-03-2019, 12:21 PM,
Post: #2
|
|||
|
|||
RE: RCD 510 death after reading code on bench Nec + 95128
(23-03-2019, 13:49 PM)Jester Wrote: Radio 3C0 035 195AWhen you undersold it , are you sure that you dont touched the mainboard somewhere with the hot iron?Eaven a slight scratch between the printed circuit and iron could lead to bricked or a faulty mainboard.Eventualy a static charge could have killed it but i doubt.Its always better to ground yourself before doing this risky stuff. |
|||
31-03-2019, 09:02 AM,
(This post was last modified: 31-03-2019, 12:33 PM by Jester.)
Post: #3
|
|||
|
|||
RE: RCD 510 death after reading code on bench Nec + 95128
well, i cant say i didn't do that , could happen and probable happen.
that's why unit doesn't work . In past few years have read those codes a lots.. that is not my first radio but that happen me first time... That's why im little confuse ...what i did wrong ,cause iv'e got a code Yesterday i check all mosfet . all ok , found one capacitor short to the ground but still have short .. check board under microscope step by step and no suspected found i asking hear cause maybe someone have similar problem and there is some typical elements on board which they bust ... i read date of nec , no problem read data of eeprom , no problem nec+eeprom no problem ok... some day i try find .. lucky that was my radio unit not costumer Thx for replay Please Click On Thanks & Rep..... if My Post Was helpful
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Mercedes Anti theft Code COMAND | electrolab | 500 | 147,128 |
Yesterday, 02:51 AM Last Post: autocar15 |
|
NEED radio code | ILDIRA | 1 | 44 |
02-05-2024, 20:33 PM Last Post: motor man |
|
need code chrysler | DAVservice | 1 | 37 |
02-05-2024, 17:22 PM Last Post: pitgamy |
|
need radio code | ILDIRA | 1 | 42 |
02-05-2024, 16:59 PM Last Post: sp852 |
|
VW Radio LOW EU BVX Bosch code | fuktak | 0 | 29 |
02-05-2024, 08:23 AM Last Post: fuktak |
|
Feature Installer Code | Zenith automotive | 0 | 50 |
30-04-2024, 21:32 PM Last Post: Zenith automotive |
|
Skoda Dance Technisat pin code | ppsvara | 2 | 48 |
30-04-2024, 18:11 PM Last Post: ppsvara |
|
Ford Smax Radio Code from serial. screenshot included. | tigerwatkins | 2 | 52 |
29-04-2024, 14:47 PM Last Post: pitgamy |
|
SkodaSwing Delphi code | despabb | 1 | 61 |
25-04-2024, 14:44 PM Last Post: pitgamy |
|
radio code | soufian | 0 | 71 |
24-04-2024, 20:45 PM Last Post: soufian |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content