[Czozen]

Hi,

I know there are a lot of threads here and on other boards but i didn't found my case anyware

Can anyone help?

Preconditions:
- Fan is spinning 100%,
- Black screen,
- All 3 ECU's are answering correctly CI63, CI62, CIA0.

Problem:
- Can not flash any of ECU by MOST always getting error of "wrong conversion" by WinKFP.

I did try to flash CI63 it with Expert Mode (WinKFP) By K-CAN cable (by ICOM can not even start to flash):
1. NAAB went ok 100% with information "Bootsector update OK"
2. Program always stuck on 51% (after about 16h-17h) with error in attachment.
3. Data went ok 100%,


Any advice?

[duckdonald]

does the optical port light up?
with which software version are you trying to flash?

[semiix]

most conncect and now program

[Czozen]

does the optical port light up?
with which software version are you trying to flash?

Yes, Red Light ist present in MOST connector.
Trying to flash in expert mode Spdaten V41

[willisodhiambo]

does the optical port light up?
with which software version are you trying to flash?

Yes, Red Light ist present in MOST connector.
Trying to flash in expert mode Spdaten V41

When you run inpa ident or UIF with ICOM, what do you see?

[atomantmk]

does the optical port light up?
with which software version are you trying to flash?

Yes, Red Light ist present in MOST connector.
Trying to flash in expert mode Spdaten V41

You don't have MOST connection, light must be green...