Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Mercedes retrofit blind spot assist
27-03-2019, 04:15 AM,
Post: #1
YTMercedes  Mercedes retrofit blind spot assist
Hi,

I'm hoping someone here can help me with this.  

I have retrofitted blind spot assist on a 2018 GLC 43 AMG (including rear radar sensors, new bumper wiring harness, wiring to K40 fuse block, ground and CAN PER, Left/Right mirror glass with blind spot indicator and additional wiring between mirror and door control modules)

I used Vediamo and EIS222.CBR to enable option code 234.  I now get the option on the cluster, but it indicates that blind spot assist is inoperative.  I can successfully actuate the indicators in the mirrors using Xentry.  I cannot communicate with the radar sensors using Xentry.

So I guess my questions are:
  1.  Is there anything else I would need to enable via Vediamo, before I start troubleshooting wiring to the rear bumper wiring harness?
  2.  If the wiring is correct, should Xentry be able to communicate with the radar sensors?


Thanks in advance for any help/suggestions.

David
Quote this message in a reply
27-03-2019, 07:36 AM,
Post: #2
RE: Mercedes retrofit blind spot assist
Hi, I did removal of blind assist for W212 2014, there need coding in the instruments and cgw. Instruments done with Xentry author data and cgw with vediamo (totwinkel nicht active). After that blind assist disappear. But as much I remember, radar sensors was connected to the other module, rear sam or instruments, xentry not show separate module for radars.
Reputation: +1 - BS68 [+1]
Quote this message in a reply
[+] 1 user says Thank You to keturi for this post
03-06-2019, 08:12 AM,
Post: #3
RE: Mercedes retrofit blind spot assist
(27-03-2019, 04:15 AM)dmcconnell68 Wrote:  Hi,

I'm hoping someone here can help me with this.  

I have retrofitted blind spot assist on a 2018 GLC 43 AMG (including rear radar sensors, new bumper wiring harness, wiring to K40 fuse block, ground and CAN PER, Left/Right mirror glass with blind spot indicator and additional wiring between mirror and door control modules)

I used Vediamo and EIS222.CBR to enable option code 234.  I now get the option on the cluster, but it indicates that blind spot assist is inoperative.  I can successfully actuate the indicators in the mirrors using Xentry.  I cannot communicate with the radar sensors using Xentry.

So I guess my questions are:
  1.  Is there anything else I would need to enable via Vediamo, before I start troubleshooting wiring to the rear bumper wiring harness?
  2.  If the wiring is correct, should Xentry be able to communicate with the radar sensors?


Thanks in advance for any help/suggestions.

David

Where in EIS did you configure blind spot assist?

I found it in IC (Xentry author data) and CGW.

Did you successfully retrofit this option in the end? Was there anything else you needed to do?
Quote this message in a reply
03-06-2019, 22:34 PM,
Post: #4
RE: Mercedes retrofit blind spot assist
The EIS part was actually in the CGW, for me:
VCD_02_global_variant_coding

There, I am able to enable/disable all sorts of options, including blind spot assist smile
Quote this message in a reply
04-06-2019, 02:05 AM,
Post: #5
RE: Mercedes retrofit blind spot assist
For newer cars its in Eis older cgw


Skye:reshi1233
Mercedes Scn Coding 24/7
Add/Remove SA Codes to Vedoc/DataCard
Retrofit Lights(ILS, Xenon ,Static )
Airbag and Mileage Correction Solutions

Quote this message in a reply
[+] 1 user says Thank You to Reshi for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
YTMercedes Mercedes-Benz history by VIN rezt 229 18,828 08-03-2024, 23:20 PM
Last Post: KTMF
YTMercedes Give away one MAP PIN for Mercedes Navi mars2moon 7 276 06-03-2024, 18:23 PM
Last Post: mars2moon
  FullFixBySamik v4.3 + Mercedes soft easiest installation & activation samo733792 2 1,596 27-02-2024, 08:05 AM
Last Post: jiawanfeng
  Bosch 30333 datasheet, pinout or anything help with ESP BAS ECU from Mercedes W463 grzewoj 0 62 26-02-2024, 06:42 AM
Last Post: grzewoj
  Solved ✔ Mercedes Viano W639 crank no start passador83 3 125 04-02-2024, 04:56 AM
Last Post: passador83
  Diagram mercedes GL450 v8 Tito 1 87 30-01-2024, 16:53 PM
Last Post: gcs190
YTMercedes Mercedes-Benz FDOK XT/XN Keygen volavka 245 80,202 20-01-2024, 23:12 PM
Last Post: satfix.ireland
  Carplay mercedes a class bboctavian 2 226 18-01-2024, 09:20 AM
Last Post: bboctavian
  Solved ✔ Mercedes W245 722.8 variant coding JorBo 3 225 17-01-2024, 09:59 AM
Last Post: JorBo
YTMercedes Mercedes Price-List 2023-01 Free for all SerJ-R 9 1,522 15-01-2024, 09:41 AM
Last Post: SerJ-R

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content