Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

BMW FRM3 repair with R270+?
29-03-2019, 18:58 PM,
Post: #1
XZBMW  BMW FRM3 repair with R270+?
Does anybody have info if it is possible to repogramm the eeprom of a BMW FRM3 with the R270+ programmer?

I read it everywhere in the Net but no info over the mask, eeprom or the connection with R270!?!?!?!?
Quote this message in a reply
29-03-2019, 19:27 PM,
Post: #2
RE: BMW FRM3 repair with R270+?
(29-03-2019, 18:58 PM)syrus Wrote:  Does anybody have info if it is possible to repogramm the eeprom of a BMW FRM3 with the R270+ programmer?

I read it everywhere in the Net but no info over the mask, eeprom or the connection with R270!?!?!?!?
No you can not program the MCU of an FRM (MC9s12XEQ384) with an R270.
You need an X-PROG,VVDI-prog,.. to be able to program the MCU.
R270 does not have the correct mask for that chip.

If my post was helpful to you please give me a thanks and/or reputation biggrin
Quote this message in a reply
[+] 1 user says Thank You to Batje for this post
29-03-2019, 20:11 PM,
Post: #3
RE: BMW FRM3 repair with R270+?
(29-03-2019, 19:27 PM)Batje Wrote:  
(29-03-2019, 18:58 PM)syrus Wrote:  Does anybody have info if it is possible to repogramm the eeprom of a BMW FRM3 with the R270+ programmer?

I read it everywhere in the Net but no info over the mask, eeprom or the connection with R270!?!?!?!?
No you can not program the MCU of an FRM (MC9s12XEQ384) with an R270.
You need an X-PROG,VVDI-prog,.. to be able to program the MCU.
R270 does not have the correct mask for that chip.

Yep, seen it in the R270 program that it is not supported ... but many thanks for yoi fast answer!
Quote this message in a reply
29-03-2019, 21:58 PM,
Post: #4
RE: BMW FRM3 repair with R270+?
(29-03-2019, 20:11 PM)syrus Wrote:  
(29-03-2019, 19:27 PM)Batje Wrote:  
(29-03-2019, 18:58 PM)syrus Wrote:  Does anybody have info if it is possible to repogramm the eeprom of a BMW FRM3 with the R270+ programmer?

I read it everywhere in the Net but no info over the mask, eeprom or the connection with R270!?!?!?!?
No you can not program the MCU of an FRM (MC9s12XEQ384) with an R270.
You need an X-PROG,VVDI-prog,.. to be able to program the MCU.
R270 does not have the correct mask for that chip.

Yep, seen it in the R270 program that it is not supported ... but many thanks for yoi fast answer!

only FRM2 posible with 0L15Y masket ...
Quote this message in a reply
[+] 2 users say Thank You to rs@chip for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
ZTAudi BCM2 Flash Repair/Check in Need karabzn 5 105 27-03-2024, 15:10 PM
Last Post: sixcode
  Audi A8 D4 bcm2 dump repair fault 02811 kuki88 1 62 13-03-2024, 18:00 PM
Last Post: ROD-BENDERS
  Solved ✔ BMW 318i FRM REPAIR Black Alien 5 138 11-03-2024, 12:51 PM
Last Post: Black Alien
  BCM2 Touareg 7P 2012 repair - DTC 02811 vopi 2 132 23-02-2024, 16:49 PM
Last Post: ROD-BENDERS
XZBMW BMW FRM 2 REPAIR e87 1 series Black Alien 1 129 04-02-2024, 08:51 AM
Last Post: sixcode
  Cas3 E84 Repair mapino 3 162 31-01-2024, 09:47 AM
Last Post: cipi gutuie
  Bcm 2 Audi A4 Data Repair mechanior2686 6 251 20-01-2024, 12:39 PM
Last Post: rs@chip
  Solved ✔ hi help for repair EEP PDC for golf6 arsi 5 231 12-01-2024, 17:08 PM
Last Post: arsi
VToyota Solved ✔ Toyota steering angle sensor repair 89245-74010 93c66 firas 2 338 12-01-2024, 16:33 PM
Last Post: firas
  frm3 bmw Aldi 4 199 11-01-2024, 15:41 PM
Last Post: Gabriel87

Forum Jump:


Users browsing this thread:
4 Guest(s)

Return to TopReturn to Content