Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

F25 + LED + FLA
27-08-2019, 13:10 PM,
Post: #1
XZBMW  F25 + LED + FLA
Hello, have some srange situation.
X3 F25 '15 USA, retrofitted Adaptive LED headlights ECE '18. Everyting works fine. 
After that retrofitted FLA mirror, it is visible in ECU list, cone code it with no problem. SZL with HBA button from f25. But HBA works only after coding, when Ignition is turned off/on it isn working. All ecu's flashed to same iLevel, coded ECE/US with no luck.
Will appreciate any help!
Quote this message in a reply
27-08-2019, 14:06 PM,
Post: #2
RE: F25 + LED + FLA
what mirror have you installed? the classic non KAFAS one?
Quote this message in a reply
27-08-2019, 16:56 PM, (This post was last modified: 27-08-2019, 22:18 PM by Clusters.)
Post: #3
RE: F25 + LED + FLA
(27-08-2019, 13:10 PM)buzzy Wrote:  Hello, have some srange situation.
X3 F25 '15 USA, retrofitted Adaptive LED headlights ECE '18. Everyting works fine. 
After that retrofitted FLA mirror, it is visible in ECU list, cone code it with no problem. SZL with HBA button from f25. But HBA works only after coding, when Ignition is turned off/on it isn working. All ecu's flashed to same iLevel, coded ECE/US with no luck.
Will appreciate any help!

I equip the F10 with FLA and I am having the same situation with you.  After VO code FRM, HBA works but when the engine is switched on and open again, HBA is lost.


Attached Files
link.txt
File Type: .txt
Downloaded: 9 times
Size: 93 bytes

Quote this message in a reply
28-08-2019, 10:20 AM,
Post: #4
RE: F25 + LED + FLA
(27-08-2019, 16:56 PM)dncomputech Wrote:  
(27-08-2019, 13:10 PM)buzzy Wrote:  Hello, have some srange situation.
X3 F25 '15 USA, retrofitted Adaptive LED headlights ECE '18. Everyting works fine. 
After that retrofitted FLA mirror, it is visible in ECU list, cone code it with no problem. SZL with HBA button from f25. But HBA works only after coding, when Ignition is turned off/on it isn working. All ecu's flashed to same iLevel, coded ECE/US with no luck.
Will appreciate any help!

I equip the F10 with FLA and I am having the same situation with you.  After VO code FRM, HBA works but when the engine is switched on and open again, HBA is lost.

So no ideas now?
Quote this message in a reply
28-08-2019, 13:12 PM, (This post was last modified: 28-08-2019, 13:30 PM by Clusters.)
Post: #5
RE: F25 + LED + FLA
(28-08-2019, 10:20 AM)buzzy Wrote:  
(27-08-2019, 16:56 PM)dncomputech Wrote:  
(27-08-2019, 13:10 PM)buzzy Wrote:  Hello, have some srange situation.
X3 F25 '15 USA, retrofitted Adaptive LED headlights ECE '18. Everyting works fine. 
After that retrofitted FLA mirror, it is visible in ECU list, cone code it with no problem. SZL with HBA button from f25. But HBA works only after coding, when Ignition is turned off/on it isn working. All ecu's flashed to same iLevel, coded ECE/US with no luck.
Will appreciate any help!

I equip the F10 with FLA and I am having the same situation with you.  After VO code FRM, HBA works but when the engine is switched on and open again, HBA is lost.

So no ideas now?

Can you share with me CADF ECU FRM, ICM, JBFE, SZL, FLA to find the problem? PM
Quote this message in a reply
30-08-2019, 11:03 AM,
Post: #6
RE: F25 + LED + FLA
(28-08-2019, 13:12 PM)dncomputech Wrote:  
(28-08-2019, 10:20 AM)buzzy Wrote:  
(27-08-2019, 16:56 PM)dncomputech Wrote:  
(27-08-2019, 13:10 PM)buzzy Wrote:  Hello, have some srange situation.
X3 F25 '15 USA, retrofitted Adaptive LED headlights ECE '18. Everyting works fine. 
After that retrofitted FLA mirror, it is visible in ECU list, cone code it with no problem. SZL with HBA button from f25. But HBA works only after coding, when Ignition is turned off/on it isn working. All ecu's flashed to same iLevel, coded ECE/US with no luck.
Will appreciate any help!

I equip the F10 with FLA and I am having the same situation with you.  After VO code FRM, HBA works but when the engine is switched on and open again, HBA is lost.

So no ideas now?

Can you share with me CADF ECU FRM, ICM, JBFE, SZL, FLA to find the problem? PM

No problem, client will be back, will contact you!
Quote this message in a reply


Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content