[shefi]

I want to read and then write after make dpf off on opel combo 2006 MJD 1.3 z13dtj. I have mpps v16, kessv2 and ktag. I am more confident with obd port. And if anyone know Which program is secure to make dpf off, volta, dpf proffesional remover, ecusafe , because i don't want to try without been sure. Thanks

[racin-snake]

MPPS version 18 reads these on the bench via multiboot no need to open the ecu just use the cable to pins on ecu with a power supply

[shefi]

MPPS version 18 reads these on the bench via multiboot no need to open the ecu just use the cable to pins on ecu with a power supply

Is it safe if i read/write with kess v2 via obd port!  i don't have MPPS V18.

[X-treme]

If it is mjd 602 Kess didn't work for me, it needs to separate flash and micro afterwards, and then merge them before writing. reading was okay but writing would not start. magpro x17 could not do it because of k-line so i went to local tuner who did it with cmd on bench for me. also dpf remover didn't work for me. Had manual solution.