[dadoa4]

I can not change the mileage in the ECU, it's okay my mileage and the message that the kilometers have changed but they do not change? 
x-tool, does not work 
Renolink 1.52 not work

[unlocker]

First you need to do abs and cluster then you can change with renolink.

[dadoa4]

That's exactly how I did it, abs, cluster and the ECU, showing the actual km. and I get the message that it's changed but the kilomets are the same

[unlocker]

Try disconnect abs connector and then try to change and read in ecu

[dadoa4]

does not work the same as before

[unlocker]

Then I dont know...Maybe software is not same in ecu..
My work ok

[lekingabs]

write car?model?

[dadoa4]

Megane 2012 1.5dci 81kw

[lekingabs]

if you want use xtool you need remove plug abs and make change in dash and remove after dash plug and connect dash abs and make change abs after done connect dash and abs and make change ecu by obd.if you use avdi not remove any think make change by renault online software

[dadoa4]

I just had a few pieces and there was no problem, first abs then dash and then ECU and I had no problem so far, message from the x tool and renolink that the operation was done but not