Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Digiprog 3 peugeot help
21-06-2014, 03:46 AM,
Post: #1
|
|||
|
|||
Digiprog 3 peugeot help
Hello friends
i really need some help to figure out pins number on my peugeot 307 bsi. im usng digipro 3 v 4.88 and i have to use cable st-47 and on the manual of the machine pins not showing clearly i appreciate any help best regards |
|||
21-06-2014, 10:00 AM,
Post: #2
|
|||
|
|||
RE: Digiprog 3 peugeot help
(21-06-2014, 03:46 AM)7nash Wrote: Hello friendsWith this digipro tool you cannot do it unfortunately! friend look!!!in this case you need a chip tuning interface and a program tool to extract the pin code,mate i advise you to this tool"UPA USB"it's the best |
|||
21-06-2014, 15:07 PM,
Post: #3
|
|||
|
|||
RE: Digiprog 3 peugeot help
I appreciate your help but what i really want to do is take down the mileage and on the main interface of digipro 3 it ask for plug 47 but the manual with the machine id not clear enough :/
so should i remove eeprom to change the mileage??? |
|||
21-06-2014, 17:12 PM,
Post: #4
|
|||
|
|||
RE: Digiprog 3 peugeot help
(21-06-2014, 15:07 PM)7nash Wrote: I appreciate your help but what i really want to do is take down the mileage and on the main interface of digipro 3 it ask for plug 47 but the manual with the machine id not clear enough :/oh yeah!mileage!!say from the beginning man tell me!this tools"upa usb,xprog"with you or not |
|||
21-06-2014, 17:25 PM,
Post: #5
|
|||
|
|||
RE: Digiprog 3 peugeot help
(21-06-2014, 03:46 AM)7nash Wrote: Hello friendsMileage BSI doing differently than ecu.Foto the ecu. |
|||
21-06-2014, 21:32 PM,
Post: #6
|
|||
|
|||
RE: Digiprog 3 peugeot help
(21-06-2014, 03:46 AM)7nash Wrote: Hello friends As is see i think that this in the photo is not bsi.It is the ecu. You dont need to do somethink on it. Bsi is on the drivers side down on the left. Also digiprog can do only newer models of 307. For older models you need adapter cable 59 which is not included to digiprog |
|||
22-06-2014, 01:38 AM,
Post: #7
|
|||
|
|||
RE: Digiprog 3 peugeot help
For now i dont have ups usb and im gonna buy it.
actually i followed the manual step by step but im stuck . should i remove the eeprom or what ?? does carport can do that?? can anyone advise me for a solution ??? and i appreciate any help Best regards |
|||
22-06-2014, 06:56 AM,
Post: #8
|
|||
|
|||
RE: Digiprog 3 peugeot help
What you want to correct course? ECU or BSI. The ECU is also a course.
|
|||
23-06-2014, 01:27 AM,
Post: #9
|
|||
|
|||
RE: Digiprog 3 peugeot help
(21-06-2014, 03:46 AM)7nash Wrote: Hello friends here are some types of bsi for 307 to read it since you did not give all the info clearly |