[zeze]

hi

maby somebody nows the resistence value to cheat the dpf sensor fore a smart cdi euro5

trying to program my car with euro4 software (with same ecu edc16c35) but doesnt work not even starts also some good member try to make me an file with dpf off also not sucessfull (attached all files)

i dont like put dpf off but already had to put 2 sensors in less then a year this is a pain to dismount this car also the car goes in extreme limb mode and no aceleration at all


any info is welkom

regards
ze

[AMcharge]

forgetting will not work.
Replaced the sensor.
For dpf off in these cars the rotation goes from 900 to 1000 rpm, I have a manual solution 100% ok but it works with the same sw ... nor the swiftec will do the solution well

[zeze]

i see and with your solution will the rotation also increase 100rpm?

[AMcharge]

i see and with your solution will the rotation also increase 100rpm?

do not. already developed the solution for all dpf egr sw without the problem of 1100 rpm