Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Clip V.139 install win7 32
21-06-2014, 11:03 AM,
Post: #1
Clip V.139 install win7 32
I have problems with installing of V.139.

1.) It was good installed on PC with Win7 64bit, but there are no 64bit drivers for it. Bad luck!

2.) In notebook with Win7 32bit -
Durring install of V.139 - are comming few errors, for example
a.) not all files are successfully copied...
b) some parts of Clip (UpdateVisuConf.exe, etc...)
are not Win32 applications ...

3.) Then I removed V.139 and started with V.125
Old version V.125 was installed without any problems!

But the installation of V.139 over V.125 brings same erros like mentioned above.

What to do? Some one met such problems with V.139?
Please help!
Quote this message in a reply
21-06-2014, 11:11 AM,
Post: #2
RE: Clip V.139 install win7 32
Download another copy of clip software or update your windows.
Quote this message in a reply
21-06-2014, 11:49 AM, (This post was last modified: 21-06-2014, 11:54 AM by Gigan.)
Post: #3
RE: Clip V.139 install win7 32
(21-06-2014, 11:11 AM)eudin77 Wrote:  Download another copy of clip software or update your windows.

Hi Eudin!
What you mean - another copy?
same version V.139? or older?

in principle I need it for test of relatively old car of 2007,
is version v.125 enough for it?
or better having newer one?
Quote this message in a reply
21-06-2014, 11:54 AM,
Post: #4
RE: Clip V.139 install win7 32
(21-06-2014, 11:49 AM)Gigan Wrote:  
(21-06-2014, 11:11 AM)eudin77 Wrote:  Download another copy of clip software or update your windows.

Hi Eudin!
What you mean - another copy?
same version V.139? or older?

Another copy-that mean: v139 from another uploader of software.
I can confirm that v139 from mr. cedrsan work fine, I tested.
Here:
http://garage-automotive.com/showthread.php?tid=4083

Quality tool as the beautiful woman...
Quote this message in a reply
[+] 4 users say Thank You to obdstart for this post
21-06-2014, 11:58 AM,
Post: #5
RE: Clip V.139 install win7 32
(21-06-2014, 11:54 AM)obdstart Wrote:  
(21-06-2014, 11:49 AM)Gigan Wrote:  
(21-06-2014, 11:11 AM)eudin77 Wrote:  Download another copy of clip software or update your windows.

Hi Eudin!
What you mean - another copy?
same version V.139? or older?

Another copy-that mean: v139 from another uploader of software.
I can confirm that v139 from mr. cedrsan work fine, I tested.
Here:
http://garage-automotive.com/showthread.php?tid=4083

thank you, i will try it!
Quote this message in a reply
21-06-2014, 12:43 PM,
Post: #6
RE: Clip V.139 install win7 32
Take the one from Cedrsan, thats always working
Quote this message in a reply
[+] 2 users say Thank You to Renopower for this post
21-06-2014, 20:44 PM,
Post: #7
RE: Clip V.139 install win7 32
I have installed version of Cedrsan without errors (first removed previous one). Thank you!
But now i cannot open RsrWin to make registration, maybe i did not remove registration data?

1.) Please tell how I can check the registration, may be it is registered due to old install?
2.) when I connected Canclip to Car and PC windows 7 automatically installed only one driver;
windows did not ask for four old drivers... do I need to install those 4 drivers?
If yes, how to install them?
3.) (i am beginner) how I can know if hardware and software are correctly installed ?
how I can know if hardware is correctly working? Is there Instructions available?
Quote this message in a reply
22-06-2014, 08:31 AM,
Post: #8
RE: Clip V.139 install win7 32
Maybe your sonde is defective dead
Quote this message in a reply
22-06-2014, 08:45 AM,
Post: #9
RE: Clip V.139 install win7 32
(21-06-2014, 20:44 PM)Gigan Wrote:  I have installed version of Cedrsan without errors (first removed previous one). Thank you!
But now i cannot open RsrWin to make registration, maybe i did not remove registration data?

1.) Please tell how I can check the registration, may be it is registered due to old install?
2.) when I connected Canclip to Car and PC windows 7 automatically installed only one driver;
windows did not ask for four old drivers... do I need to install those 4 drivers?
If yes, how to install them?
3.) (i am beginner) how I can know if hardware and software are correctly installed ?
how I can know if hardware is correctly working? Is there Instructions available?

Some only need one driver. Best just to test it.
Quote this message in a reply
22-06-2014, 10:51 AM,
Post: #10
RE: Clip V.139 install win7 32
(22-06-2014, 08:45 AM)TizWoz Wrote:  
(21-06-2014, 20:44 PM)Gigan Wrote:  I have installed version of Cedrsan without errors (first removed previous one). Thank you!

how I can know if hardware is correctly working? Is there Instructions available?

Some only need one driver. Best just to test it.

How better to test it?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ORenult Clip 235 flavio69 0 59 26-03-2024, 11:34 AM
Last Post: flavio69
ORenult Clip 236 flavio69 0 135 22-03-2024, 12:44 PM
Last Post: flavio69
ORenult Clip Renault v237 santanas 2 410 13-03-2024, 21:21 PM
Last Post: santanas
ORenult CAN CLIP SOFTWARE ACTIVATIONS cracoucass 454 156,040 09-03-2024, 14:47 PM
Last Post: greenhorn
ODacia Clip 234 flavio69 14 1,336 27-02-2024, 21:36 PM
Last Post: Chad69
ORenult OpenPort 2.0 J2534 Reg files for CLIP ninjahwdp 7 829 26-02-2024, 22:10 PM
Last Post: drovid
ORenult CLIP 219 flavio69 22 3,296 25-02-2024, 07:28 AM
Last Post: flavio69
  Clip 231 flavio69 4 599 24-02-2024, 08:29 AM
Last Post: flavio69
ORenult CLIP 232 flavio69 33 3,043 24-02-2024, 08:23 AM
Last Post: flavio69
ORenult Clip 230 flavio69 19 2,237 24-02-2024, 08:19 AM
Last Post: flavio69

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content