[Black Alien]

Friends,

A client from a distance has 2007 Mazda Verisa, Japan Made. He lost key. I then asked him to send over his Dashboard cluster to have a key made using bench programmer, Tango, to be specific. It happened that its 93c56 eeprom one leg got damaged when I was removing it using hot air station. it happened before I could extract key data file.

Lucky enough, I have new blank eeproms gotten from china.
can you help me with a working file that can be used to have the car started?

below is the Chip ID that I was to use if all went well.

Regards

[raffy haddad]

Friends,

A client from a distance has 2007 Mazda Verisa, Japan Made. He lost key. I then asked him to send over his Dashboard cluster to have a key made using bench programmer, Tango, to be specific. It happened that its 93c56 eeprom one leg got damaged when I was removing it using hot air station. it happened before I could extract key data file.

Lucky enough, I have new blank eeproms gotten from china.
can you help me with a working file that can be used to have the car started?

below is the Chip ID that I was to use if all went well.

Regards

hello here try this file with your key data
This file belongs to your previous thread but with the key data that you want
The km ofcourse will be different and the car might not start due maybe need ecu dash synchro P.S : are you sure immo data is in dash ?
test and report back please

[Black Alien]

or immo data is stored in the ECU? I only told my client to bring the dash at the workshop to have his key made. Well, I will keep in touch

[dil6222]

Hello or if your lucky do you still have the eeprom with the leg missing ? 

If so you can save yourself some hassle

get a dremel with a small bit or a 0.5mm drill bit and cut away slowly just above where the leg is snapped to expose the edge of the leg then solder a wire to it and the you can read the original file then havent got to mess with adapting and mileage etc

[raffy haddad]

Or do as dil6222 advise you but very carefully
Because not sure if immodata is in dash or in ecu or bcm or immobox
Maybe another member made a car like it can confirm