Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

DME downgrade protection
06-05-2019, 11:52 AM,
Post: #21
RE: DME downgrade protection
Newest cars better in Bench mode .....


Is somebody here, they can extract BMW Stock files from PSDZ Data ?
Quote this message in a reply
06-05-2019, 21:39 PM,
Post: #22
RE: DME downgrade protection
(05-05-2019, 17:51 PM)Kuiyt2 Wrote:  
(28-04-2019, 06:57 AM)snf11lci Wrote:  In my opinion it does not matter.  It does not have to be online.  It can also be offline ISTA standalone or ESYS, but with the same version i-level as it is in a car or newer one.  

The main question is.  Is car or soft 19-3-xx really has Tuning protection ?
Does anyone know ?

It has no tuning protection. All these tuning tools and their “virtual libraries” only match a couple parts of the SWFL & BTLD and give you a file they have on file. They just don’t have the latest bootloader patched yet.

if I understand correctly.  the problem is that the tools are not yet adapted to the new BTLD and therefore an error occurred during the upload right ?
Quote this message in a reply
06-05-2019, 22:51 PM,
Post: #23
RE: DME downgrade protection
(06-05-2019, 21:39 PM)snf11lci Wrote:  
(05-05-2019, 17:51 PM)Kuiyt2 Wrote:  
(28-04-2019, 06:57 AM)snf11lci Wrote:  In my opinion it does not matter.  It does not have to be online.  It can also be offline ISTA standalone or ESYS, but with the same version i-level as it is in a car or newer one.  

The main question is.  Is car or soft 19-3-xx really has Tuning protection ?
Does anyone know ?

It has no tuning protection. All these tuning tools and their “virtual libraries” only match a couple parts of the SWFL & BTLD and give you a file they have on file. They just don’t have the latest bootloader patched yet.

if I understand correctly.  the problem is that the tools are not yet adapted to the new BTLD and therefore an error occurred during the upload right ?

Correct
Quote this message in a reply
09-05-2019, 20:41 PM,
Post: #24
RE: DME downgrade protection
Thanks so much.
Quote this message in a reply
05-07-2019, 00:21 AM,
Post: #25
RE: DME downgrade protection
Has anyone finally managed to downgrade from btld 19-03-xxx to btld 18-11-xxx?
It seems not possible with Esys
Quote this message in a reply
05-07-2019, 11:04 AM,
Post: #26
RE: DME downgrade protection
This is the error you get when you try to flash 18-11 softwares

Read SVT before TAL execution started.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2019/07/04-18:35:54.115
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForFlash started [PROGRESS]
[] prepareVehicleForFlash finished [PROGRESS]
[DME_BAC - 12] prepareECUforBLUpdate started [PROGRESS]
[DME_BAC - 12] prepareECUforBLUpdate finished [PROGRESS]
[DME_BAC - 12] authenticateECUforBLUpdate started [PROGRESS]
[DME_BAC - 12] authenticateECUforBLUpdate finished [PROGRESS]
[DME_BAC - 12 - btld_0000208c-002_059_005] Transaction type: blFlash; Message: TA started [TRANSACTION]
[DME_BAC - 12] performECUBLUpdate started with protocol UDS [PROGRESS]
[DME_BAC - 12 - btld_0000208c-002_059_005] Transaction type: blFlash; Message: 0% progress on ECUIdbiggrinME_BAC_0x12 [0% of btld_0000208c-002_059_005] [TRANSACTION]
[DME_BAC - 12 - btld_0000208c-002_059_005] Transaction type: blFlash; Message: 0% progress on ECUIdbiggrinME_BAC_0x12 [0% of btld_0000208c-002_059_005] [TRANSACTION]
[DME_BAC - 12 - btld_0000208c-002_059_005] Transaction type: blFlash; Message: 0% progress on ECUIdbiggrinME_BAC_0x12 [0% of btld_0000208c-002_059_005] [TRANSACTION]
[DME_BAC - 12 - btld_0000208c-002_059_005] Transaction type: blFlash; Message: 0% progress on ECUIdbiggrinME_BAC_0x12 [0% of btld_0000208c-002_059_005] [TRANSACTION]
[DME_BAC - 12 - btld_0000208c-002_059_005] Transaction type: blFlash; Message: 0% progress on ECUIdbiggrinME_BAC_0x12 [0% of btld_0000208c-002_059_005] [TRANSACTION]
[DME_BAC - 12 - btld_0000208c-002_059_005] Transaction type: blFlash; Message: 0% progress on ECUIdbiggrinME_BAC_0x12 [0% of btld_0000208c-002_059_005] [TRANSACTION]
[DME_BAC - 12 - btld_0000208c-002_059_005] Transaction type: blFlash; Message: 0% progress on ECUIdbiggrinME_BAC_0x12 [6% of btld_0000208c-002_059_005] [TRANSACTION]
[DME_BAC - 12 - btld_0000208c-002_059_005] Transaction type: blFlash; Message: 1% progress on ECUIdbiggrinME_BAC_0x12 [100% of btld_0000208c-002_059_005] [TRANSACTION]
[DME_BAC - 12 - btld_0000208c-002_059_005] Transaction type: blFlash; Message: TA finished [TRANSACTION]
[DME_BAC - 12] installECUBL started [PROGRESS]
MCDDiagService<id=43200, job=com.bmw.psdz.jobs.uds.MCD3_InstallECUBL, service=RC_CPD - RoutineControl CheckProgrammingDependencies, description=error: positive response with negative content, link=DME_BAC_12_ETHERNET> [DIAGSERVICE]
[DME_BAC - 12] installECUBL error [PROGRESS]
[] job failed with negative response error:
code: the programming dependencies are not correct
description: MCD3_InstallECUBL failed - service RoutineControl CheckProgrammingDependencies delivered incorrectResultError_SWE_SWE; LinkName: DME_BAC_12_ETHERNET
severity: ERROR
[THROWABLE]
[DME_BAC - 12] There was an error during TAL execution, please check the log files. [WARN]
[DME_BAC - 12] - [Exception - DME_BAC - 12] job failed with negative response error:
code: the programming dependencies are not correct
description: MCD3_InstallECUBL failed - service RoutineControl CheckProgrammingDependencies delivered incorrectResultError_SWE_SWE; LinkName: DME_BAC_12_ETHERNET
severity: ERROR

[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "56s". [C206]
Quote this message in a reply
14-10-2019, 08:45 AM,
Post: #27
RE: DME downgrade protection
any update on this?
Quote this message in a reply
10-11-2022, 10:39 AM,
Post: #28
RE: DME downgrade protection
Has anyone managed to downgrade from btld 19-07-xxx to btld 18-03-xxx?
ECU Mevd17.2.3 F30 B38
Quote this message in a reply
16-11-2022, 00:32 AM,
Post: #29
RE: DME downgrade protection
Donwagrade can be done in bench mode. I can assemble any firmware from psdzdata files and svt.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Entrynav2 Component Protection gt678 19 2,525 Yesterday, 14:38 PM
Last Post: pshoey
XZBMW Component protection NBT Evo Help bo0tn1c 16 2,243 19-03-2024, 20:54 PM
Last Post: wagusty
  Entrynav2 - Trying to Trigger Component Protection on Bench 2002JCW 5 465 30-01-2024, 16:44 PM
Last Post: DEJMIEN
  Bmw 328i f30 1B2002 Ews protection against tampering: no start value programmed Bavrian 2 230 10-01-2024, 10:30 AM
Last Post: Bavrian
XZBMW BMW M3 G80 Bosch Unlock Tuning protection mdma666 7 1,182 16-12-2023, 18:26 PM
Last Post: hulahans
0Engine Istep 18-03 component protection evo rickynguyen 2 444 25-08-2023, 15:22 PM
Last Post: Rob@BU
XZBMW Entrynav2 iLevel downgrade - clear V850 ssh command flausatu 9 1,071 24-08-2023, 18:13 PM
Last Post: BugFix
  rollover protection DTC 9402 budddyyy 3 367 09-07-2023, 10:39 AM
Last Post: krug
  Solved ✔ After replacing bdc and programmimg mgu has protection bmwlover 10 1,440 04-07-2023, 20:56 PM
Last Post: bmwlover
XZBMW Need help with winkfp, downgrade DDE newbie69 14 994 24-06-2023, 19:35 PM
Last Post: ____ANGEL___

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content