[Kamil.tokarz]

hi guys I just installed to my friend Bmw f30 USA used European led headlights and I have problem with left turn signal it just blink 3 times then go very fast like with error or something :/ 
Some advice maybe coding error ? Lamp has fle 43 and fle44 Module. I am quite fresh with ways so maybe I just did something wrong with coding headlights?

[aridain]

Did you teach-in the modules with ISTA?

[kubixix]

FLE43 and FLE44 doesn't have teach in procedure in ISTA. Only old Led's with LHM and TMS.

[BB-Driver]

Code FLE with ECE VO

[bmwcoder75]

Change Typeschlussel first. To ECE.
Then VO code FEM

[Kamil.tokarz]

ok i understand but tell my how to change Typeschlussel to ECE if there is 8E37 in the car and there is no european equivalent:/

---

Change Typeschlussel first. To ECE.
Then VO code FEM

ok i understand but tell my how to change Typeschlussel to ECE if there is 8E37 in the car and there is no european equivalent:/

[kmodel99]

ok i understand but tell my how to change Typeschlussel to ECE if there is 8E37 in the car and there is no european equivalent:/

---

Change Typeschlussel first. To ECE.
Then VO code FEM

ok i understand but tell my how to change Typeschlussel to ECE if there is 8E37 in the car and there is no european equivalent:/

Use Typeschlussel 8E91, but just temporary, don't save it in car. It's F30 328i (no xDrive), and its N26 engine (yours is N20).

And check errors with ISTA, there should be at least one error. If need help, contact me, I'm from Poland, and I think that you also.