Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II

  2. FemtoEVO

  3. Cas4 & Cas4+



Problems with insert fscs with fstool
11-04-2019, 12:32 PM, (This post was last modified: 12-04-2019, 23:03 PM by Clusters.)
Post: #1
XZBMW  Problems with insert fscs with fstool
hii friends,,

i have problems with my cic, to insert fcs certs do let work in my pre facelift e60. The cic is already flashed to latest software and also patched with a red screen.

My Fstool is not good installed i think, he give errror 11028? who can help me?

Greetings!
Quote this message in a reply
11-04-2019, 12:35 PM,
Post: #2
RE: Problems with insert fscs with fstool
Use Dr Gini instead to load your fsc’s.
Quote this message in a reply
11-04-2019, 13:02 PM,
Post: #3
RE: Problems with insert fscs with fstool
(11-04-2019, 12:35 PM)sebastianfernandes Wrote:  Use Dr Gini instead to load your fsc’s.

Cic rejects the fsc,s

Pruefung signature or something dr gini say

greet
Quote this message in a reply
11-04-2019, 13:20 PM,
Post: #4
RE: Problems with insert fscs with fstool
Can you explain in more detail which certificate are you trying to load
1) load and check sig cert
2) load and check all fscs certs 17/19/1b/9C etc
3) load fsc and check fsc on all 17/19/1b/9c
Did you make the fsc codes?
Did you sign them after making the changes?
Quote this message in a reply
12-04-2019, 21:26 PM,
Post: #5
RE: Problems with insert fscs with fstool
(11-04-2019, 13:20 PM)sebastianfernandes Wrote:  Can you explain in more detail which certificate are you trying to load
1) load and check sig cert
2) load and check all fscs certs 17/19/1b/9C etc
3) load fsc and check fsc on all 17/19/1b/9c
Did you make the fsc codes?
Did you sign them after making the changes?


Did it all, self made fsc witj fstool
Quote this message in a reply
12-04-2019, 23:14 PM,
Post: #6
RE: Problems with insert fscs with fstool
Do you got an icom?

If my post helped you hit the thanks and reputation button

Remote coding available - no software required only BMW Icom - send pm for more info
Quote this message in a reply
14-04-2019, 01:49 AM,
Post: #7
RE: Problems with insert fscs with fstool
Merge your existing FSTOOL, Carserver and EDIABAS installation with these files:
https://cartechnology.co.uk/showthread.p...#pid241156

Make sure ediabas is correctly set up for your interface.

In the parameter tab make sure diagnostic address is 63.
fill in the app ID of the FSC you want to load

In the Configuratuion tab make sure you have the signature certificate pointed towards the sigs.der file in the SIGS folder of the patcher.
Do the same for your FSC cert.

Go to SWT develop tab, make sure everything is loaded above the job selection otherwise you've done something wrong in the previous steps.
Write vin in the VIN box, move SET_VIN and GET_VIN to the right in that order.
Then click 'execute' and it should return your vin.

next delete SET and GET_VIN from the right and move in STORE_SIGS_CERT and CHECK_SIGS_CERT to the right in that order and execute them. status should return succesfull.
Next move STORE_FSC_CERT, CHECK_FSC_CERT,STORE_FSC,CHECK_FSC and PERIODICAL_CHECK to the right and execute them for your first loaded up FSC. if it returns successfull load the remaining fsc's and certs in the parameter and configuration tabs and then execute the sequence mentioned above for your other FSC's and certs.

Now all your FSC's and CERTS should be activated in the CIC

If my post was helpful to you please give me a thanks and/or reputation biggrin
Quote this message in a reply
14-04-2019, 10:17 AM,
Post: #8
RE: Problems with insert fscs with fstool
(14-04-2019, 01:49 AM)Batje Wrote:  Merge your existing FSTOOL, Carserver and EDIABAS installation with these files:
https://cartechnology.co.uk/showthread.p...#pid241156

Make sure ediabas is correctly set up for your interface.

In the parameter tab make sure diagnostic address is 63.
fill in the app ID of the FSC you want to load

In the Configuratuion tab make sure you have the signature certificate pointed towards the sigs.der file in the SIGS folder of the patcher.
Do the same for your FSC cert.

Go to SWT develop tab, make sure everything is loaded above the job selection otherwise you've done something wrong in the previous steps.
Write vin in the VIN box, move SET_VIN and GET_VIN to the right in that order.
Then click 'execute' and it should return your vin.

next delete SET and GET_VIN from the right and move in STORE_SIGS_CERT and CHECK_SIGS_CERT to the right in that order and execute them. status should return succesfull.
Next move STORE_FSC_CERT, CHECK_FSC_CERT,STORE_FSC,CHECK_FSC and PERIODICAL_CHECK to the right and execute them for your first loaded up FSC. if it returns successfull load the remaining fsc's and certs in the parameter and configuration tabs and then execute the sequence mentioned above for your other FSC's and certs.

Now all your FSC's and CERTS should be activated in the CIC

can you do it remotly please?
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
XZBMW BMW E61 Coding problems after retrofit. Turbid 7 731 05-10-2019, 19:55 PM
Last Post: Ecutech
  FSTool Import Issues - 6F and 9C Only mxchris727 5 594 01-10-2019, 00:11 AM
Last Post: codemybmw
XZBMW FSTOOL ruben_17non 390 217,397 30-09-2019, 22:48 PM
Last Post: nm88
XZBMW F30 coding problems legolas8911 5 298 23-09-2019, 08:50 AM
Last Post: iyade46
  Problems with lastest psdzdata Drimacus 14 1,001 20-09-2019, 15:28 PM
Last Post: shawnsheridan
  Solved ✔ Problems Coding $3AH to E70 with NCS Pommie 3 306 17-09-2019, 14:27 PM
Last Post: Pommie
  Solved ✔ CIC FSC activating problems, sig check fails Freddy1 9 466 14-09-2019, 08:45 AM
Last Post: Freddy1
  Problems with ista 4.18.32 snypertje 20 1,300 10-09-2019, 18:22 PM
Last Post: snypertje
XZBMW Help with CIC patch, fstool duss46 2 388 09-09-2019, 21:32 PM
Last Post: duss46
  Solved ✔ PDC/Park Assist Problems Gecko.ch 1 450 31-07-2019, 10:33 AM
Last Post: Gecko.ch

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content