Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
can icom a have next firmware installed in it
13-04-2019, 00:29 AM,
Post: #1
|
|||
|
|||
can icom a have next firmware installed in it
can i install NEXT FIRMWARE IN icom A
|
|||
13-04-2019, 03:07 AM,
Post: #2
|
|||
|
|||
RE: can icom a have next firmware installed in it
No, the hardware is different. You need to use the correct firmware for the ICOM you have. Keep in mind that Chinese ICOM Next clone actually uses A2 hardware.
What is your objective? |
|||
01-10-2019, 17:53 PM,
Post: #3
|
|||
|
|||
RE: can icom a have next firmware installed in it
i am trying to program the ccc on a e60 but it says i need latest next software to program. i tried using next software and the after the icom address it says firmware
|
|||
01-10-2019, 20:20 PM,
(This post was last modified: 01-10-2019, 20:21 PM by user0086.)
Post: #4
|
|||
|
|||
RE: can icom a have next firmware installed in it
With the latest firmware, an ICOM A will work just as well. But for E-series you need ISTA-P for programming.
Just make very sure that you are using the MOST adapter! |
|||
09-10-2019, 21:58 PM,
Post: #5
|
|||
|
|||
RE: can icom a have next firmware installed in it
does anyone still have a link to the latest firmware available for the BMW ICOM A2 (with WiFi)?
|
|||
10-10-2019, 08:59 AM,
Post: #6
|
|||
|
|||
RE: can icom a have next firmware installed in it
Vojnó
Press Thanks and reputation if this post helped you. |
|||
13-10-2022, 13:31 PM,
Post: #7
|
|||
|
|||
RE: can icom a have next firmware installed in it
Just bought a chinese icom next clone. Before used icom a. Can somebody tell me how to acces the icom next. To see for the firmware and even update if necessary. Many years ago since i did it.
Grt guy |
|||
13-10-2022, 13:40 PM,
Post: #8
|
|||
|
|||
RE: can icom a have next firmware installed in it
(13-10-2022, 13:44 PM) guyf4 Wrote: Just bought a chinese icom next clone. Before used icom a. Can somebody tell me how to acces the icom next. To see for the firmware and even update if necessary. Many years ago since i did it. It is the same procedure for all |