Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
EDC16C39 - Alfa 159 JTD. Clarifications
|
24-06-2014, 10:05 AM,
Post: #1
|
|||
|
|||
|
EDC16C39 - Alfa 159 JTD. Clarifications
I have doubts about some maps, hope you can teach me! here I go:
1C356C EGR 16x14 The values inside the map go from 3000 to 12000, do they refer just to the position of the valve, so that I can read them like 0% to 100% ? 1C4ECA IQ limiter rpm 12x1 Is that 100 mg/st limit for all RPMs? Does it make sense for an ORI map? 1CD358 Smoke limiter lower/higher 16x16 The lower the values the higher the injected quantity, right? It means that if the values are too low they will cause smoke? 1D1FDC SOI 16x16 For this map I used the factor 0,023437 and offset 0, then I see that all the values below 3000 RPM and 30mg/st are extremely high (about 1500) compared to the rest of the map (from 0 to 24). What is the meaning of this? 1D3938 pre injection 16x16 The values inside the map seems to be the Rail Pressure..is that right? 1DC0DE Injection duration 20x20 Is the Y-axis the Rail Pressure? Thanks for your support! |