Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW used Cas2 module transfer keys
17-04-2019, 08:47 AM,
Post: #1
|
|||
|
|||
BMW used Cas2 module transfer keys
I'm going to replace the cas2 module of a 07/2005 BMW with an used one.
How can I transfer the keys from one module to the other? I'm not sure if I can read the current cas2 module but I can give it a try. I have the following tools available: -BMW Explorer original -hiTag2 clone -R270+ clone I can change the vin of the used cas2 module with R270+. ISN can be changed with BMW Explorer. The only part I'm stuck is how to transfer the keys to the used cas2 module? MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
17-04-2019, 09:00 AM,
Post: #2
|
|||
|
|||
RE: BMW used Cas2 module transfer keys
Read internal eeprom of Motorola CPU and write to new Cas2 module
BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
17-04-2019, 21:56 PM,
Post: #3
|
|||
|
|||
RE: BMW used Cas2 module transfer keys
I start hiTag2 (version 3.1) ==> advanced functions ==> BMW and then click on eeprom data?
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
20-04-2019, 03:46 AM,
Post: #4
|
|||
|
|||
RE: BMW used Cas2 module transfer keys
Clone cas eeprom and flash by reading old and write to new. If mask is 279, bridge pin and resistor at the rear incase r270 gives pin error. Seach here 270 and cas2 and you will find solution.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content