ATTENTION !! Users which have not any posts were deleted !
  1. New Emulator

  2. Julie Emulator

  3. Immo Bypass

  4. HEXPROG



Ford Focus 2017 donor PCM calibration initialization immo
17-04-2019, 12:30 PM, (This post was last modified: 17-04-2019, 12:41 PM by Kayhan 17#.)
Post: #1
Ford Focus 2017 donor PCM calibration initialization immo
Hey guys,
i have a VCM2 Clone, after crash the original ECU is irreparably damaged and i need to flash the used donor ECU to match car.
I have IDS 107, 108 and now 112.

I tested IDS 107 so far and once i go to Reprogramming Module and press OK -> OK .. it kicks me to the main Menu where i can select Reprogramming Module again.
I manually added calibration files as it told me, downloaded from fordtech website..
Is this because of the old version of IDS or the Computer Date?

Any Alternatives?

Even with legit VCMM and official online FDRS it does not work, i erased both keys, relearned both keys, then tried to do PCM configuration and it throws an error(the diag device could not communicate with car / operation failed), PCM initialisation also does not work, is there any trick behind?

Engine not starting, DTCs P161A-00 and P161B-00

Alternatively, any immo off solutions?

Regards
Quote this message in a reply
21-04-2019, 01:46 AM,
Post: #2
RE: Ford Focus 2017 donor PCM calibration initialization immo
Good evening, and why not just clone the ecu directly?

even with a broken plate, it has ways of extracting information from one and passing it to another

anyway, about their mistake, almost all ECUs need to be virginized, before being able to pair with the immobilizer

In addition you need data of your ecu, as well as the type of engine of your vehicle, for help

regards

idea

If my file goes with password, Thank you and Reputation for its obtaining, if you publish it again without the password, the link and your help will end, if neither thank you want to give, because we have to help you =?

under
Quote this message in a reply
21-04-2019, 04:00 AM,
Post: #3
RE: Ford Focus 2017 donor PCM calibration initialization immo
After learn keys did you do a parameter reset in PATS?
Quote this message in a reply
22-04-2019, 10:08 AM,
Post: #4
RE: Ford Focus 2017 donor PCM calibration initialization immo
hey mate,

look here at the video i made

i can not clone the ecu as infineon tricore chip got broke off the pcb


Attached Files Thumbnail(s)
   
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
JFiat Fiat croma 2.2L gasoline immo problem sandor1987 0 11 53 minutes ago
Last Post: sandor1987
TMisubshi Mitsubushi Lancer 2006 MT MH8206F immo off obkaza 0 11 1 hour ago
Last Post: obkaza
HPorshe Solved ✔ 2013 porsche cayenne v8 diesel immo off issue deutsch 6 115 1 hour ago
Last Post: deutsch
  IMMO OFF Alfa Romeo 156 ME7.3.1 Jbb69 0 44 5 hours ago
Last Post: Jbb69
  need immo off Renault Siemens EMS3134 wajda3 1 48 9 hours ago
Last Post: louka
ORenult Help immo off clio siemens sirius 34 Edo993 1 58 Yesterday, 19:15 PM
Last Post: al70
ZVW T5 problem, immo or dump needed gummimann88 2 105 Yesterday, 18:05 PM
Last Post: Maxis
JFiat Ducato 2002 immo off bosch 0281010346 Chris16 2 87 Yesterday, 18:02 PM
Last Post: Chris16
LFord Ford Smax 2007 immobilizier active dont start arcelik 14 576 Yesterday, 16:42 PM
Last Post: danyguit2000
0Immo iveco daily 2,3 immo-off vwdamian 3 143 Yesterday, 08:48 AM
Last Post: dabaca

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content