ATTENTION !! Users which have not any posts were deleted !
  1. AutoHex



Solved ✔ Difficulty getting PC to communicate with BMW X5 F15 via ENET
17-04-2019, 17:52 PM, (This post was last modified: 18-04-2019, 18:36 PM by Clusters.)
Post: #1
XZBMW  Difficulty getting PC to communicate with BMW X5 F15 via ENET
I am having difficulty getting my laptop to communicate with my X5 F15 via ENET. It can communicate with the car  via ICOM but would not via ENE. I need help getting this resolved.

Thank you
17-04-2019, 17:59 PM,
Post: #2
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
It's Your network setup correct?
17-04-2019, 18:03 PM, (This post was last modified: 17-04-2019, 18:04 PM by sebastianfernandes.)
Post: #3
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
Ediabas setup up as “Enet”
Just use easyconnect utility and setup..
Interface - Enet
IP address - autodetect
And your network adapter should be set to automatic ip
Hope it helps..
17-04-2019, 18:43 PM,
Post: #4
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
Okay. Will try those out.

Thanks
17-04-2019, 19:30 PM,
Post: #5
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
I often have to disconnect and reconnect the battery to reset the gateway if it doesn't show with ESYS
17-04-2019, 20:07 PM,
Post: #6
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
(17-04-2019, 17:52 PM)fatfash Wrote:  I am having difficulty getting my laptop to communicate with my X5 F15 via ENET. It can communicate with the car  via ICOM but would not via ENE. I need help getting this resolved.

Thank you


I assume ICOM is usein D-CAN to communicate with car. You can see which is being used in ISTA.

(17-04-2019, 19:30 PM)PhilipM Wrote:  I often have to disconnect and reconnect the battery to reset the gateway if it doesn't show with ESYS

I've had to do the same.

under If my post helped you hit the thanks and reputation button. Thank you. yes
17-04-2019, 20:07 PM,
Post: #7
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
If you first use ICom and straight after that enet cable I also experience issues. I always close drive door lock. Force sleep with ista. Wait till start button and hazard illumination is off. After that plug enet cable in obd. This works for me.
17-04-2019, 21:36 PM, (This post was last modified: 17-04-2019, 21:39 PM by fatfash.)
Post: #8
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
(17-04-2019, 19:30 PM)PhilipM Wrote:  I often have to disconnect and reconnect the battery to reset the gateway if it doesn't show with ESYS


This was the last thing I did after several failed attempts. I used to do this when I had cloned ICOM, thought it was the ICOM that was the issue.

Thanks for this info

(17-04-2019, 20:07 PM)larshutten Wrote:  If you first use ICom and straight after that enet cable I also experience issues. I always close drive door lock. Force sleep with ista. Wait till start button and hazard illumination is off. After that plug enet cable in obd. This works for me.


Thank you, will also consider this method

(17-04-2019, 20:07 PM)Spirit5676 Wrote:  
(17-04-2019, 17:52 PM)fatfash Wrote:  I am having difficulty getting my laptop to communicate with my X5 F15 via ENET. It can communicate with the car  via ICOM but would not via ENE. I need help getting this resolved.

Thank you


I assume ICOM is usein D-CAN to communicate with car. You can see which is being used in ISTA.

(17-04-2019, 19:30 PM)PhilipM Wrote:  I often have to disconnect and reconnect the battery to reset the gateway if it doesn't show with ESYS

I've had to do the same.


Yes 100%, was confused when I sa this.
17-04-2019, 21:50 PM,
Post: #9
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
Net Work and connection settings bring up lan settings,

Set,

IPV4 Settings,

169.254.1.1
255.255.0.0

Works for me on all cars with ENET
17-04-2019, 21:58 PM,
Post: #10
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
Thanks, tried it also without success, but will give it a try again.


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW programming with Enet cable. Twointje 95 10,383 12-06-2021, 19:09 PM
Last Post: ferbmw
  modBMW WIFI ENET adapter Experience Bimmer540 11 695 09-04-2021, 15:30 PM
Last Post: bmwkastela
XZBMW Itool Radar non detect ENET diogomelop 5 2,396 22-02-2021, 23:26 PM
Last Post: donjuan020
  Remote Coding via VPN with tgflash and enet tste1982 11 1,117 16-01-2021, 23:15 PM
Last Post: DJCRO
  Sporadic IFH-003 Error with ENET cable and with ICOM nano M-Simon 2 173 23-10-2020, 17:50 PM
Last Post: M-Simon
XZBMW Flash with ISTA+ through ENET ferbmw 2 396 07-10-2020, 11:54 AM
Last Post: Node
XZBMW NBT & NBT EVO Coding via USB or ENET muhar 5 540 08-09-2020, 15:25 PM
Last Post: HU_man
  Solved ✔ PAD active with ENET, need ini file? willisodhiambo 7 353 29-08-2020, 19:57 PM
Last Post: willisodhiambo
XZBMW Enet-Cable connection? Bimmer540 8 2,687 23-07-2020, 18:51 PM
Last Post: Mwahab
  [Question] Flash NBT EVO via ENET cable with E-sys danyro 4 1,882 19-07-2020, 06:20 AM
Last Post: danyro

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content