Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ Difficulty getting PC to communicate with BMW X5 F15 via ENET
17-04-2019, 17:52 PM, (This post was last modified: 18-04-2019, 18:36 PM by Clusters.)
Post: #1
XZBMW  Difficulty getting PC to communicate with BMW X5 F15 via ENET
I am having difficulty getting my laptop to communicate with my X5 F15 via ENET. It can communicate with the car  via ICOM but would not via ENE. I need help getting this resolved.

Thank you
17-04-2019, 17:59 PM,
Post: #2
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
It's Your network setup correct?
17-04-2019, 18:03 PM, (This post was last modified: 17-04-2019, 18:04 PM by sebastianfernandes.)
Post: #3
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
Ediabas setup up as “Enet”
Just use easyconnect utility and setup..
Interface - Enet
IP address - autodetect
And your network adapter should be set to automatic ip
Hope it helps..
17-04-2019, 18:43 PM,
Post: #4
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
Okay. Will try those out.

Thanks
17-04-2019, 19:30 PM,
Post: #5
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
I often have to disconnect and reconnect the battery to reset the gateway if it doesn't show with ESYS
17-04-2019, 20:07 PM,
Post: #6
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
(17-04-2019, 17:52 PM)fatfash Wrote:  I am having difficulty getting my laptop to communicate with my X5 F15 via ENET. It can communicate with the car  via ICOM but would not via ENE. I need help getting this resolved.

Thank you


I assume ICOM is usein D-CAN to communicate with car. You can see which is being used in ISTA.

(17-04-2019, 19:30 PM)PhilipM Wrote:  I often have to disconnect and reconnect the battery to reset the gateway if it doesn't show with ESYS

I've had to do the same.
17-04-2019, 20:07 PM,
Post: #7
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
If you first use ICom and straight after that enet cable I also experience issues. I always close drive door lock. Force sleep with ista. Wait till start button and hazard illumination is off. After that plug enet cable in obd. This works for me.
17-04-2019, 21:36 PM, (This post was last modified: 17-04-2019, 21:39 PM by fatfash.)
Post: #8
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
(17-04-2019, 19:30 PM)PhilipM Wrote:  I often have to disconnect and reconnect the battery to reset the gateway if it doesn't show with ESYS


This was the last thing I did after several failed attempts. I used to do this when I had cloned ICOM, thought it was the ICOM that was the issue.

Thanks for this info

(17-04-2019, 20:07 PM)larshutten Wrote:  If you first use ICom and straight after that enet cable I also experience issues. I always close drive door lock. Force sleep with ista. Wait till start button and hazard illumination is off. After that plug enet cable in obd. This works for me.


Thank you, will also consider this method

(17-04-2019, 20:07 PM)Spirit5676 Wrote:  
(17-04-2019, 17:52 PM)fatfash Wrote:  I am having difficulty getting my laptop to communicate with my X5 F15 via ENET. It can communicate with the car  via ICOM but would not via ENE. I need help getting this resolved.

Thank you


I assume ICOM is usein D-CAN to communicate with car. You can see which is being used in ISTA.

(17-04-2019, 19:30 PM)PhilipM Wrote:  I often have to disconnect and reconnect the battery to reset the gateway if it doesn't show with ESYS

I've had to do the same.


Yes 100%, was confused when I sa this.
17-04-2019, 21:50 PM,
Post: #9
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
Net Work and connection settings bring up lan settings,

Set,

IPV4 Settings,

169.254.1.1
255.255.0.0

Works for me on all cars with ENET
17-04-2019, 21:58 PM,
Post: #10
RE: Difficulty getting PC to communicate with BMW X5 F15 via ENET
Thanks, tried it also without success, but will give it a try again.


Possibly Related Threads…
Thread Author Replies Views Last Post
  FEM Not working with ENET but works wtih DCAN armenh7 0 50 25-03-2024, 00:04 AM
Last Post: armenh7
  ISTA AOS and enet cable Wojti77 6 1,203 24-01-2024, 04:28 AM
Last Post: vipsha
XZBMW No wifi internet after connecting enet via cable. AlpinWeiss2k18 4 311 20-12-2023, 01:17 AM
Last Post: gfriedrichi
XZBMW ENET Connection Problems mikkaav 4 426 11-12-2023, 20:27 PM
Last Post: Node
  ENET Connection error in ISTA mcrussell 12 837 04-11-2023, 17:11 PM
Last Post: Siki78
  Did some handiwork, ENET cable with voltage display rocdeng 1 415 13-10-2023, 12:48 PM
Last Post: OneKillaWatt
XZBMW Motorrad esys coding using ENET and ICOMD cable bennymx 13 2,711 09-09-2023, 12:38 PM
Last Post: zemanely
XZBMW esysx IspiHostAdmin connected remotly to car with enet cable need the way please rana 13 3,047 03-09-2023, 06:45 AM
Last Post: rana
XZBMW ENET vs ICOM for complete flashing/programming G series cars with ISTA (and ESYS) ctgy8923 7 1,175 16-08-2023, 19:19 PM
Last Post: davidoff86
  Teamviewer VPN alternative for remote connection/remote enet Rudkinp 3 654 05-07-2023, 12:45 PM
Last Post: Rudkinp

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content