[Bavrian]

have a f10 with 6wa cluster eeprom 160D0WT mileage is going up few km on every ignition cycle no tamper dot is presenet

eeprom mileage and vin was done using cg pro using mode 1

eeprom reads are attached 

the original donor cluster eeprom read and the file that has vin and mileage erased 

can this be resolved with original eeprom

[evaldazj]

Eeprom is damaged now. need change

[Bavrian]

Eeprom is damaged now. need change

So loading original dump back to original eeprom and using another tool like r270 to reset the mileage won’t resolve this

Does this chip contain a id area

[evaldazj]

Chip itself is damaged. Read again, and check first 2 lines, you will there few bits that are 00, and imposible to write them

[Bavrian]

Will try and write original dump and read
Eeprom again to see if the first lines change