[jackluci]

Hi guys, can somebody do stage1+egr off for my friend passat? Many tanks for every mans work on this forum

[SSAutoPerformance]

Hi guys, can somebody do stage1+egr off for my friend passat? Many tanks for every mans work on this forum

Here u go,
Passw in PM after thx and rep!
Enjoy!

[jackluci]

Hi guys, can somebody do stage1+egr off for my friend passat? Many tanks for every mans work on this forum

Here u go,
Passw in PM after thx and rep!
Enjoy!

hi man, the car works good but egr i think it s not off becouse it produces 2600mbar and desired is 2200.. with vcds on egr live values desire is 800mg at idle speed and produced 400.. what do u think?

---

Hi guys, can somebody do stage1+egr off for my friend passat? Many tanks for every mans work on this forum

Here u go,
Passw in PM after thx and rep!
Enjoy!

hi man, the car works good but egr i think it s not off becouse it produces 2600mbar and desired is 2200.. with vcds on egr live values desire is 800mg at idle speed and produced 400.. what do u think?

2200 desire on full gas and 2600 produced on full gas, it kinda scared me )

[Jurebv]

its not because of EGR...its overboosting due to increased fuel and exhaust gases which spin turbo faster, need n75 map adjustments

[jackluci]

its not because of EGR...its overboosting due to increased fuel and exhaust gases which spin turbo faster, need n75 map adjustments

it would go into limp mode cuz svbl is 2400, so i think it s egr, tell me if i m wrong

[Jurebv]

for egr off = 0 from 1C6F12 to 1C6F38 and 65535 (-1) from 1C7008 to 1C702E

and for limp mode, i wish it was true for all cars, but some never go to limp

[jackluci]

that s the way i found them on original map,on modified map first one is all 0 and second one all 0 you say that i need to modify the first one to 0 on all map and the second one, bottom one to -1? sorry for multiple asks but i want to be sure that i understand what i read i ll try to do some complete mappack for this car and will post it here

[Rov Gti]

Egr solution it is ok. 2600 is not too much for a second or two, until will be regulated to nominal IF that is the real value( sensor max. read is 2600)

[Jurebv]

Are you joking? Of course its too much!!! 2.6 bar overshoot if specified 2.2 bar..

[jackluci]

you say that a spike of 1-2sec its bad, but that was the constant pressure on full throttle, the boost map was changed entirely and the car shakes a lot when starting the engine.. but dont know why