[schumi999octavia]

hi!i need immo off
fiat punto 1.2 16v 80hp
bosch 0261207902
me73h4 with body computer

[jasonics]

first method. if u know pincode, from ecu  get emulator from cartools.lv . Use MB can  to write pin and make proper connection,see pdf from website. 

Method 2 make ecu virgin,  input any pincode in emulator ,ecu is more than ready to accept pin. you need MBCAn logger to do these job. emulator works faster .meaning as ign on emulator wiill be the 1st to receive msg.
 its truly a fantastic tool can do many more jobs with it reseeting ecus, and many more,more more. 
 read well insrructions ,connections can hi,low,----- k line ,l line for your ecu i think.check pdf.  i use zfull to virgin most fiat ecus. if you can read pincode then ,write pin to emulator-job done.
give a plus if this has helped. 
regards.

[faycal00520]

immo off.rar
File Type:
Downloaded:	31 times
Size:	209.57 KB

Here immo off

[jasonics]

[quote="faycal00520" pid='442569' dateline='1556331034']

Here immo off
Hi thanks for immo-off, need good programming tool to read eeprom. Anyway i use emulator  k.line and Canbus for all lancia and fiat ecus last one i did was a 2015 mev17 , with emu very easy. 
thanks very much.
which programmer you use for me7.3.1 ecu to read eeprom (byte shootter) please let me know,what abt galletto,mpps,fgtech,ktag.
Rgards

[faycal00520]

[quote="faycal00520" pid='442569' dateline='1556331034']

Here immo off
Hi thanks for immo-off, need good programming tool to read eeprom. Anyway i use emulator  k.line and Canbus for all lancia and fiat ecus last one i did was a 2015 mev17 , with emu very easy. 
thanks very much.
which programmer you use for me7.3.1 ecu to read eeprom (byte shootter) please let me know,what abt galletto,mpps,fgtech,ktag.
Rgards

hi
I use galletto v54

The galletto v54 is good at reading the flash 29F ecu mev17