[Kayhan 17#]

Hey guys,

we have a problem with an e46 316 n46 motor, valvetronic is adaptable etc. but sporadically throws car in limp mode, so we want to get rid of this.

Error codes from INPA
0x2A67 and 0x2A6B
CEL and EML lights are on dashboard and i have disconnected VVT motor for now.

Any solutions(attached dump) or ideas to quick fix?

Bosch MV946 Me9+
HW 0261208388
SW 1037370310
Upg. SW 07546322


Regards

[X-treme]

Connect valvetronic motor and disconnect valvetronic sensor. I made some more dtc off, these dtc you get when disconnecting vvt sensor. Engine won't go in limp mode but has slightly less power then with valvetronic on. Try and report

[MaW]

Need the same solution for a e87 120i MV946

my errors:

0x2A59 VVT-Führungssensor
0x2A5B VVT-Referenzsensor

0x2C24 Vertauschte Lambdasonden
0x2A67 VVT-Ansteuerung

THANKS

[iyade46]

if you have teamviwer i can help you