Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

W211 E220 CDI 2003 EGR OFF
23-04-2019, 06:32 AM,
Post: #1
YTMercedes  W211 E220 CDI 2003 EGR OFF
Hello

I am searching for a working solution on a W211 EGR Off. i want to learn how to make the EGR off with Winols
i saw there is two way to make egr off

solution1-  with a connected egr ---> make change on the EGR map (just 1 map?) . or do i ahve to make change on others map?
solution2-  with disconnected egr --> Hysteresis map (i think in the w211 e220 there is 2 map )  have to change the to zero. just this maps or do i have to make change on other maps?

when to choose which one to use?
wchich one is better? 
how do the System know about the failed air coming from the EGR? how to replace that air? from Turbo?

Any experience with other Software egr off?

Many thanks
Quote this message in a reply
23-04-2019, 07:32 AM,
Post: #2
RE: W211 E220 CDI 2003 EGR OFF
Normally the best way is to remove the EGR from the car and remove from the software /ECU. You don't need to "replace the air" from turbo, this is exhaust and you only want that to have the fastest way out in your muffler

Back to basic....account reset to 2018  yikes
 Learning by reading, learning by doing, learning by experience drive 


Quote this message in a reply
[+] 1 user says Thank You to Willinickersen for this post
23-04-2019, 07:58 AM,
Post: #3
RE: W211 E220 CDI 2003 EGR OFF
just close by hyst and for disconnected remove dtcs you get after disconnecting

Fileservice Dyno Tested: Stage 1,2,3 , Manual: DPF off, EGR off, AdBlue
https://www.tuning-makarska.com/   We offer free slave tools !
Official Magicmotorsport Distributor
Official Autotuner Distributor
Official Alientech Distributor

DAMOS List: https://docs.google.com/document/d/1gpra...zynXdvmLw/


Quote this message in a reply
[+] 1 user says Thank You to Jurebv for this post
23-04-2019, 08:38 AM,
Post: #4
RE: W211 E220 CDI 2003 EGR OFF
(23-04-2019, 07:58 AM)Jurebv Wrote:  just close by hyst and for disconnected remove dtcs you get after disconnecting

close by hyst means zeroid the hyster maps?
in other forum i saw they zeroid or -1 ?

how to check after disconneting the egr and changing the hyster nap that all work fine?

Sorry for my bad englisch

thank you
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
VScion Audi A3 2003 stage 1 canisha 3 152 21-03-2024, 11:58 AM
Last Post: canisha
1Iveco AM29F400BT Daily Iveco de 2003 opsys 3 149 11-03-2024, 07:13 AM
Last Post: opsys
YTMercedes Solved Mercedes W211 E270 CDI Remap Please Fraz 2 628 08-03-2024, 09:59 AM
Last Post: Dragan78
  w211 edc16cp31 need ori hdcarmods 2 129 22-02-2024, 21:46 PM
Last Post: ELMACHT_2000
  Audi A8 D3 2003 3.7 BFL dtc off P0022 34ko 1 79 01-02-2024, 11:07 AM
Last Post: Romulus
  mb w211 320cdi dpf mercis 2 117 29-01-2024, 21:49 PM
Last Post: Hazerssmurf
ZVW VW PASSAT 2003 ME7.5 KAT off Lambda off Borys 9 291 29-01-2024, 14:46 PM
Last Post: Stopro92
WHyundai hyundai accent 1.4 97hp 2003 m7.9.0 lambda off mohcin2 1 108 12-01-2024, 08:15 AM
Last Post: iori974
  w211 crd11 egr off jurscam 1 123 12-11-2023, 21:11 PM
Last Post: NTec
  ZGW Dump Mercedes W211 mechanior2686 0 159 08-11-2023, 21:03 PM
Last Post: mechanior2686

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content