ATTENTION !! Users which have not any posts were deleted !
  1. New Emulator

  2. Julie Emulator

  3. Immo Bypass



HEXTAG By Microtronik Support / Feedback
23-05-2020, 06:54 AM,
Post: #131
RE: HEXTAG By Microtronik Support / Feedback
(22-05-2020, 18:19 PM)dasi Wrote:  I tried to read D-Flash and P-Flash in Porsche BCM 1N35H using Hextag but I was able to only read D-Flash. P-Flash wasn't possible. I always had "failed to unlock chipset ref 943" so I give up. I won't risk writing D-Flash using tool that can not correctly read P-Flash. I bought it to be able to read without desolder but from what I see it is not possible. I'm still waiting for respond from Microtronik team (24hrs and counting).
hi sorry friday we are closed and right now we are on EID holidays until tuesday so support is available partially only.if you can read d-flash then your connections is ok so you must be able to read P-flash also.our support team in skype/whatsapp will guide you some procedure i believe they have already replied to you.
Visit this user's website
Quote this message in a reply
23-05-2020, 09:36 AM,
Post: #132
RE: HEXTAG By Microtronik Support / Feedback
(23-05-2020, 06:54 AM)MTKAutoHex Wrote:  
(22-05-2020, 18:19 PM)dasi Wrote:  I tried to read D-Flash and P-Flash in Porsche BCM 1N35H using Hextag but I was able to only read D-Flash. P-Flash wasn't possible. I always had "failed to unlock chipset ref 943" so I give up. I won't risk writing D-Flash using tool that can not correctly read P-Flash. I bought it to be able to read without desolder but from what I see it is not possible. I'm still waiting for respond from Microtronik team (24hrs and counting).
hi sorry friday we are closed and right now we are on EID holidays until tuesday so support is available partially only.if you can read d-flash then your connections is ok so you must be able to read P-flash also.our support team in skype/whatsapp will guide you some procedure i believe they have already replied to you.

Okay, but I’m unable to read P-Flash. Only D-Flash.

FSC FULL SET(incl.CarPlay FullScreen, VIM) - NBT, NBT EVO ID4/5/6
CARPLAY ENTRYNAV2 WAY incl. Fullscreen
ANY ILEVEL(21-03,20-11,20-07 and so on)
REGION CHANGE EVO ID5/6, VO CODING FIX,BLACK SCREEN FIX, SSH OPEN

WAY, MGU, SLI KAFAS 2,4 - 7E, 11F - OEM FSC CODES
Map Region FSC conversion MGU,WAY USA to EU
CARPLAY MGU
drive PM ME for details drive
Quote this message in a reply
25-05-2020, 17:29 PM,
Post: #133
RE: HEXTAG By Microtronik Support / Feedback
(26-04-2020, 14:33 PM)bryosb Wrote:  
(25-04-2020, 12:44 PM)Bavrian Wrote:  can any one recommend a good source to buy new keys for cas3 that hextag can actually reset

all the china ones such as  PCF7945, PCF7961,PCF7941 which hextag can unlock have different circuit board and connections when looking on the internet the circuit boards dont match

either the hextag china keys unlock list is outdated a bit

can anyone share there input as I have had a few E series keys lock without programming before be handy to have keys that can be reset in case this happens once in a while


Do yourself a favor and buy up some used OE keys to reset. I buy from airport lost keys, last batch over 100 BMW/Mini keys I paid $200 usd. Never had issue with em. Also check wrecking yards and used car dealers, plenty of used keys out there, just gotta hunt for good deal. Also in US not sure of other areas dealer sell blanks to licensed locksmith.

Problem is finding thege frequency i need. USA has lots of keys but 433mhz, i need lots of 315
Quote this message in a reply
25-06-2020, 18:46 PM,
Post: #134
RE: HEXTAG By Microtronik Support / Feedback
PSA MEV17.4 Read/Write EE and Flash ,, Work smoothly smile

Br.V

BEST CHIPTUNING SERVICE BY Zenter Performance  congrats
Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   yes
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS

-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
[-] The following 2 users say Thank You to volavka for this post:
  • GsmOwar, MTKAutoHex
02-07-2020, 03:01 AM,
Post: #135
RE: HEXTAG By Microtronik Support / Feedback
I use autohex to change the VIN in CAS3 module, but it does not change VIN in all UIF entries. When customer check with INPA, still shows old VIN. Does anyone know what bytes to change in CAS eeprom to change VIN in all entries?
Quote this message in a reply
09-07-2020, 12:13 PM, (This post was last modified: 09-07-2020, 12:14 PM by pepi.)
Post: #136
RE: HEXTAG By Microtronik Support / Feedback
You mean UIF on CAS or in other units?

If  I helped you press magic buttons  clapping
Quote this message in a reply
09-07-2020, 12:45 PM,
Post: #137
RE: HEXTAG By Microtronik Support / Feedback
Yes in CAS module.
Quote this message in a reply
09-07-2020, 19:07 PM,
Post: #138
RE: HEXTAG By Microtronik Support / Feedback
You need to use aif_schriben function in tool32

If I helped, please magic buttons thx+rep yes yes yes under under under
Quote this message in a reply
[-] The following 1 user says Thank You to lustek for this post:
  • PDXAutoworks
19-07-2020, 21:04 PM, (This post was last modified: 19-07-2020, 21:06 PM by Maestro.)
Post: #139
RE: HEXTAG By Microtronik Support / Feedback
Hello, I bought a HexTag 2 month ago and when I received the package bad news I didn't find Eeprom adapter cable to renew keys, probably due to the custom check, extra cost 130 usd.
but very nice tool reed Bmw ecu in 10 sec very powerful tool.
I hope that Microtronik can make a favor and reduce the extra cost.
Quote this message in a reply
20-07-2020, 06:18 AM,
Post: #140
RE: HEXTAG By Microtronik Support / Feedback
(19-07-2020, 21:04 PM)YOUBI24 Wrote:  Hello, I bought a HexTag 2 month ago and when I received the package bad news I didn't find Eeprom adapter cable to renew keys, probably due to the custom check, extra cost 130 usd.
but very nice tool reed Bmw ecu in 10 sec very powerful tool.
I hope that Microtronik can make a favor and reduce the extra cost.
please contact us via skype/whatsapp/live chat.its sad to hear it got missed on transit.
Visit this user's website
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Xhorse vvdi bmw tool Technical Support & Feedback huzionet 76 18,521 20-06-2021, 19:17 PM
Last Post: Taric
0Immo VVDI PROG Support/Feedback Thread Czozen 261 108,277 20-06-2021, 11:54 AM
Last Post: salaausi
0Immo Renolink Support/Feedback volavka 83 29,300 11-06-2021, 20:08 PM
Last Post: fantomel
ZTAudi Autel online calculate support Vovanito 0 358 04-05-2021, 20:11 PM
Last Post: Vovanito
  FVDI Feedback / questions and answers klostazy 383 161,968 25-03-2021, 11:50 AM
Last Post: jansmerfowski
YTMercedes WESL tool by Ficho any feedback volavka 9 4,864 14-03-2021, 16:15 PM
Last Post: żarówka
  AUTEl XP401 - opiniones, feedback borysgo2 6 1,700 04-02-2021, 13:55 PM
Last Post: sivyx
0Immo Xhorse vvdi2 tool Technical Support & Feedback volavka 197 88,022 25-12-2020, 15:31 PM
Last Post: dime
  Lonsdor K518 Key Programmer feedback/suport 12manux 1 945 17-12-2020, 13:05 PM
Last Post: raffy haddad
  CGDI BMW Keytool Feedback ROD-BENDERS 89 34,629 26-11-2020, 23:16 PM
Last Post: DaBotta

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content