Dear member if you were registred before 2019.11 and have problem with LOGIN please try recovery password by click (Lost your password?) option and check your mail box , if no succes then Send me and Mail to [email protected] , and if were registred after that date then Create new account as registration is free

HEXTAG By Microtronik Support / Feedback
28-10-2019, 02:36 AM,
Post: #61
RE: HEXTAG By Microtronik Support / Feedback
Hextag no good. everything throws ref errors. always in contact with support. has 3 versions of EDC17CP14 and none work. Hextag in my instance Does not work on Windows 7 both 32 and 64. Had to install on Win 10. Comes without 12 Volt power supply and needs to be specific with 3 AMP. So out of the box you come limited for few months with Cloning version and missing power supply. Key reset only for few makes and models. Again! If you trying to save money, don't! Everything good is expensive! Everything cheap is cheap! So here you go at 510$ shipped you get somewhat of a hyped up apparatus that does not work as intended, and now wonder if I can get refund for it.
I hope this will help someone to sort thing out...
Quote this message in a reply
28-10-2019, 06:02 AM, (This post was last modified: 28-10-2019, 06:05 AM by MTKAutoHex.)
Post: #62
RE: HEXTAG By Microtronik Support / Feedback
(28-10-2019, 02:36 AM)vihorm Wrote:  Hextag no good. everything throws ref errors. always in contact with support. has 3 versions of EDC17CP14  and none work. Hextag in my instance Does not work on Windows 7 both 32 and 64. Had to install on Win 10. Comes without 12 Volt power supply and needs to be specific with 3 AMP. So out of the box you come limited for few months with Cloning version and missing power supply. Key reset only for few makes and models. Again! If you trying to save money, don't! Everything good is expensive! Everything cheap is cheap! So here you go at 510$ shipped you get somewhat of a hyped up apparatus  that does not work as intended, and now wonder if I can get refund for it.
I hope this will help someone to sort thing out...

Hextag works on win 7 32 and 64 bit operating system without any issues and as it is a BETA versions software for cloning/tuning chances are there to get errors in that case you can contact support and we will resolve it for you our support are active always to help out our customers.The EDC17CP14 you tested probably will be working on TPROT protocol(not all cp14) that's why you are getting error on it in few days we will add this protocol in our system then you can read this ecu's.Also if you can show any other tool which has this much features for this price we will be amazed.

(23-10-2019, 19:09 PM)dime Wrote:  I'd like to be clear. If i buy this tool and if i don't pay $350  next year can i use hextag to read and program cas2-4 + and reset the keys?

yes only cloning/tuning feature you need to purchase the license,all other features in hextag are lifetime free.
Visit this user's website
Quote this message in a reply
28-10-2019, 16:48 PM,
Post: #63
RE: HEXTAG By Microtronik Support / Feedback
(28-10-2019, 06:02 AM)MTKAutoHex Wrote:  
(28-10-2019, 02:36 AM)vihorm Wrote:  Hextag no good. everything throws ref errors. always in contact with support. has 3 versions of EDC17CP14  and none work. Hextag in my instance Does not work on Windows 7 both 32 and 64. Had to install on Win 10. Comes without 12 Volt power supply and needs to be specific with 3 AMP. So out of the box you come limited for few months with Cloning version and missing power supply. Key reset only for few makes and models. Again! If you trying to save money, don't! Everything good is expensive! Everything cheap is cheap! So here you go at 510$ shipped you get somewhat of a hyped up apparatus  that does not work as intended, and now wonder if I can get refund for it.
I hope this will help someone to sort thing out...

Hextag works on win 7 32 and 64 bit operating system without any issues and as it is a BETA versions software for cloning/tuning chances are there to get errors in that case you can contact support and we will resolve it for you our support are active always to help out our customers.The EDC17CP14 you tested probably will be working on TPROT protocol(not all cp14) that's why you are getting error on it in few days we will add this protocol in our system then you can read this ecu's.Also if you can show any other tool which has this much features for this price we will be amazed.

(23-10-2019, 19:09 PM)dime Wrote:  I'd like to be clear. If i buy this tool and if i don't pay $350  next year can i use hextag to read and program cas2-4 + and reset the keys?

yes only cloning/tuning feature you need to purchase the license,all other features in hextag are lifetime free.
so yes for the amount of money you get all features of doing things for older makes and models. Bench options for most cars are for older models. Key reset does not support Toyota as advertised. Everything is mostly for BMW as Autohex 2 is. ECU cloning might be the biggest thing that HEXTAG has and now you need to pay 500-1k$ for it after 2020 JAN 1
Quote this message in a reply
28-10-2019, 17:06 PM, (This post was last modified: 28-10-2019, 17:07 PM by RocketSurgeon.)
Post: #64
RE: HEXTAG By Microtronik Support / Feedback
I've been impressed with the features of Hextag for BMW modules and engine computers. Working great for all the MEVD, MSD, and EDC stuff that I've tried. I understand that ISN write will remain an Autohex capability, but I would love to see a working hour reset option in Hextag. This would be useful for power class changes, Vmax delete, and some DME coding options.
Quote this message in a reply
29-10-2019, 06:08 AM,
Post: #65
RE: HEXTAG By Microtronik Support / Feedback
(28-10-2019, 16:48 PM)vihorm Wrote:  
(28-10-2019, 06:02 AM)MTKAutoHex Wrote:  
(28-10-2019, 02:36 AM)vihorm Wrote:  Hextag no good. everything throws ref errors. always in contact with support. has 3 versions of EDC17CP14  and none work. Hextag in my instance Does not work on Windows 7 both 32 and 64. Had to install on Win 10. Comes without 12 Volt power supply and needs to be specific with 3 AMP. So out of the box you come limited for few months with Cloning version and missing power supply. Key reset only for few makes and models. Again! If you trying to save money, don't! Everything good is expensive! Everything cheap is cheap! So here you go at 510$ shipped you get somewhat of a hyped up apparatus  that does not work as intended, and now wonder if I can get refund for it.
I hope this will help someone to sort thing out...

Hextag works on win 7 32 and 64 bit operating system without any issues and as it is a BETA versions software for cloning/tuning chances are there to get errors in that case you can contact support and we will resolve it for you our support are active always to help out our customers.The EDC17CP14 you tested probably will be working on TPROT protocol(not all cp14) that's why you are getting error on it in few days we will add this protocol in our system then you can read this ecu's.Also if you can show any other tool which has this much features for this price we will be amazed.

(23-10-2019, 19:09 PM)dime Wrote:  I'd like to be clear. If i buy this tool and if i don't pay $350  next year can i use hextag to read and program cas2-4 + and reset the keys?

yes only cloning/tuning feature you need to purchase the license,all other features in hextag are lifetime free.
so yes for the amount of money you get all features of doing things for older makes and models. Bench options for most cars are for older models. Key reset does not support Toyota as advertised. Everything is mostly for BMW as Autohex 2 is. ECU cloning might be the biggest thing that HEXTAG has and now you need to pay 500-1k$ for it after 2020 JAN 1
we have mentioned and highlighted  in our order online page itself the feature is free only for the year 2019,so we are not telling anyone you will get cloning lifetime for 500$ tool.you have choices mate you have option to buy cloning in hextag for 1 grand or you can buy other tool in market for 5-7K.
Visit this user's website
Quote this message in a reply
[+] 2 users say Thank You to MTKAutoHex for this post
30-10-2019, 18:42 PM,
Post: #66
RE: HEXTAG By Microtronik Support / Feedback
Hextag For me works 100% perfect, and compare to other tools its a lot more cheaper and the risk of damaging the ecu is extremely low. I use it every day to read and write ecu, and to do many Frm ( only the FRM paid the tool in 2 Weeks) the only challenge for now is the checksum correction as it cannot do it for now but they promise they will add it very soon.
but beside that i am very happy about it.
Just waiting to know how much is the yearly license, but i am quiet confident it wont be too much.
Any other original tool, you will be paying 10x times the price and you will also pay for any new module added.
Quote this message in a reply
[+] 1 user says Thank You to bara001 for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  CGDI BMW Keytool Feedback ROD-BENDERS 61 9,537 01-11-2019, 14:55 PM
Last Post: jaramillo
XZBMW Xhorse vvdi bmw tool Technical Support & Feedback huzionet 11 466 30-10-2019, 18:35 PM
Last Post: huzionet
0Immo Renolink Support/Feedback volavka 15 1,667 24-10-2019, 05:43 AM
Last Post: flavio69
0Immo Xhorse vvdi2 tool Technical Support & Feedback volavka 162 48,207 23-10-2019, 08:22 AM
Last Post: huzionet
  VVDI2 Support/Feedback Thread volcano1980 1 145 20-10-2019, 10:58 AM
Last Post: volavka
  FVDI Feedback / questions and answers klostazy 359 84,897 14-10-2019, 20:37 PM
Last Post: MZ2711
0Immo VVDI PROG Support/Feedback Thread Czozen 237 55,597 09-10-2019, 14:08 PM
Last Post: Vojno
  Key Master/Key Master DP FEEDBACK mar.wo 29 7,006 12-09-2019, 09:29 AM
Last Post: fraserauto
0Immo Xhorse vvdi BGA MB tool Technical Support & Feedback volavka 144 58,853 29-07-2019, 22:58 PM
Last Post: valdirld
YTMercedes CGDI MB BenzMonster key tool feedback obdtool 136 38,286 22-07-2019, 17:09 PM
Last Post: raffy haddad

Forum Jump:


Users browsing this thread:
3 Guest(s)

Return to TopReturn to Content