Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ Need help with programming JBE with ISTA-P on Mini R56 JCW
30-04-2019, 12:42 PM, (This post was last modified: 08-05-2019, 13:10 PM by Clusters.)
Post: #1
Need help with programming JBE with ISTA-P on Mini R56 JCW
Has anyone tried programming JBE of 2009 Mini R56 JCW UK spec?

Well, my problem started after installation of the NEW JBE. Originally my car don't have windscreen heater installed but with the new JBE it is trying to connect to winscreen heater and complain no message from the IKHA and FRM module. I am present with the following errors with the attached image


My question is :
1. Is programming with ISTA-P on JBE required?
2. Can this be done with USB K+DCAN cable ?


Any suggestion is much appreciated. 

Many thanks.


Attached Files Thumbnail(s)
   
30-04-2019, 14:57 PM,
Post: #2
RE: Need help with programming JBE with ISTA-P on Mini R56 JCW
Of course need coding, like always after module replacement
30-04-2019, 15:01 PM,
Post: #3
RE: Need help with programming JBE with ISTA-P on Mini R56 JCW
Use NCSEXPERT with Kdcan cable, to perform the coding
02-05-2019, 09:42 AM, (This post was last modified: 02-05-2019, 10:33 AM by edwkmho.)
Post: #4
RE: Need help with programming JBE with ISTA-P on Mini R56 JCW
(30-04-2019, 15:01 PM)jaramillo Wrote:  Use NCSEXPERT with Kdcan cable, to perform the coding

thanks for you prompt respond.


Unfortunately i could not get NCSEXPERT to ever work. The last i tried was couple of years back and it is asking for prg file that i can't find. Anyway i have not use NCSEXPRT would appreciate if you can provide some pointers.

I recalled that unable to try out NCSEXPERT because not running XP or Windows 7, i am on Windows 10.

I will try to install NCS EXPERT on virtual machine with windows 7 now.

Many thanks.
02-05-2019, 12:42 PM,
Post: #5
RE: Need help with programming JBE with ISTA-P on Mini R56 JCW
(02-05-2019, 09:42 AM)edwkmho Wrote:  
(30-04-2019, 15:01 PM)jaramillo Wrote:  Use NCSEXPERT with Kdcan cable, to perform the coding

thanks for you prompt respond.


Unfortunately i could not get NCSEXPERT to ever work. The last i tried was couple of years back and it is asking for prg file that i can't find. Anyway i have not use NCSEXPRT would appreciate if you can provide some pointers.

I recalled that unable to try out NCSEXPERT because not running XP or Windows 7, i am on Windows 10.

I will try to install NCS EXPERT on virtual machine with windows 7 now.

Many thanks.

I can install you for free full package of BimmerGeeks Standard Tools thru TeamViewer. Let me know on priv if you want.

Only BMW services:

Remote coding/programming - E, F, G serie
HDD change, Carplay, Screen mirroring activation
FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS
Remote reset 8HP ISN F serie
ELV disable for CAS3, 3+
02-05-2019, 13:47 PM,
Post: #6
RE: Need help with programming JBE with ISTA-P on Mini R56 JCW
NCSExpert work perfect on Win10
02-05-2019, 18:27 PM, (This post was last modified: 02-05-2019, 18:27 PM by dextuar.)
Post: #7
RE: Need help with programming JBE with ISTA-P on Mini R56 JCW
It will be much easier for you to update the module via Winkfp, and yes, you can do that with a K-DCAN cable.
05-05-2019, 04:39 AM, (This post was last modified: 05-05-2019, 07:54 AM by edwkmho.)
Post: #8
RE: Need help with programming JBE with ISTA-P on Mini R56 JCW
hey guys,

Many thanks for your prompt respond.

Last couple of days i wasn't able to access to this site not sure why. I am sorry delay in responding.

First I have installed the NCSexpert and winKFP on my win10 and tested working-pulling the CAS inform from the car. I am totally dummy in using NCS and winkfp. Would appreciate if you guys be patient with me.

First i need to get rid of one entry in my VO, which is the EMOA, which i have accidently added in when was checking with ISTAP. I have tried the procedures below for at least 4 times, but the EMOA entry still in the VO.

This is what i have gone thru with NCS to remove the VO entry:
Before i gone in to details i have installed BimmerGeeks Standard Tools.
1. Launch inpa to confirm connection is okay with the car
2. load "Manipulation" profiles provided
3. Start - F1
4. Chassis - F3 - select R56
5. Choose ECU - selected CAS
6. Edit VO/FA - F2
7. Back - F7
8. Process ECU - select CAS
9. Change Job - Select FA-write
10. Execute Job
11. Repeat the for FRM
12. Power cycle for at least 10 second

Below is my VO list: 
R56_#0309&T9E1%0851$210$226$249$255$2PA$313$314$322$329$345$346$383$420$423$428$431$441$450$481$493$4AA$4AU$4BA$4BD$4UF$520$521$522$534$548$550$563$5AA$5DD$5DT$6FC$6FD$6ND$785$818$825$845$853$861$864$872$876$880$8S2$8TG$925*MF92-A070-EMOA-EWS4-SDON


Second, which is to recode my new JBE. Would appreciate if anyone can lend a helping hand by providing a brief instruction to go about coding this in NCSEXPERT + winKFP.

Please help. Many thanks.

Update:
Managed to get rid of the EMOA from my VO list. My bad missing the delete key press after highlighting the VO entry. Now working on the coding the new JBE. 
My VO list after remove of the EMOA - R56_#0309&T9E1%0851*MF92$210$226$249$255$2PA$313$3 14$322$329$345$346$383$420$423$428$431$441$450$481 $493$4AA$4AU$4BA$4BD$4UF$520$521$522$534$548$550$5 63$5AA$5DD$5DT$6FC$6FD$6ND$785$818$825$845$853$861 $864$872$876$880$8S2$8TG$925-A070-EWS4-SDON
yes yes yes
05-05-2019, 12:51 PM,
Post: #9
RE: Need help with programming JBE with ISTA-P on Mini R56 JCW
(02-05-2019, 18:27 PM)dextuar Wrote:  It will be much easier for you to update the module via Winkfp, and yes, you can do that with a K-DCAN cable.

HI Dextuar,

Would you mind share how to update the module with winkfp. I have no clue at all on updating the module with winkfp.  This will be my first time using winkfp.

Many thanks.
05-05-2019, 13:51 PM,
Post: #10
RE: Need help with programming JBE with ISTA-P on Mini R56 JCW
There are thousands of manuals available in google after one minute searching. First, simply use coding tool to update Winkfp with sp-daten from your model and then copy VIN from NCS. Go to WinKFP>comfort mode>update ZUSB>enter VIN> Done>Prog.ZB-Update>OK

Only BMW services:

Remote coding/programming - E, F, G serie
HDD change, Carplay, Screen mirroring activation
FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS
Remote reset 8HP ISN F serie
ELV disable for CAS3, 3+


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,652 627,955 1 hour ago
Last Post: Sedoy
  ista 4.46 Standalone kiranabc 33 3,122 Yesterday, 19:51 PM
Last Post: Siki78
  ista for use whit vcx se db8000 0 46 Yesterday, 15:28 PM
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 367 Yesterday, 10:39 AM
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,405 27-03-2024, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,491 27-03-2024, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 132 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 168 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 671 25-03-2024, 08:11 AM
Last Post: Node
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 121,530 24-03-2024, 23:45 PM
Last Post: armenh7

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content