Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

VCI not connected to DiagBox PC
02-05-2019, 22:56 PM, (This post was last modified: 02-05-2019, 23:00 PM by topdeel.)
Post: #1
PCitroen  VCI not connected to DiagBox PC
Hi PSA specialists  biggrin

I have a problem with installing the Lexia 3 VCI (DiagBox program) on the Dell D505 laptop with XP SP3. Interestingly, the interface works on Acer laptop and virtual MVware machine with XP SP3 (vehicle communication, firmware update, etc.). Also, the interface works on a Lenovo laptop PC with XP SP3 (communicates with the vehicle, adjusts the firmware to the exact version, etc.).

When I connect the VCI to the Dell D505 laptop with freshly installed XP SP3 and run the DiagBox V7.57 program, either if I choose Lexia or PP2000 the program informs me that the VCI IS NOT CONNECTED.

I try to solve this mystery all day but without success.  shake

Basically I have the correct VCI, but it's probably a problem in the software that I installed on a Dell laptop. The only difference I noticed between the XP SP3 operating system is in the Device Manager.


Why does the Dell D505 in Device Manager show a different driver compared with to Acer and Lenovo?

1. Acer VMware - ACTIA USB Com Board Evolution Driver (Multi-Instance)
2. Lenovo - ACTIA USB Com Board Evolution Driver (Multi-Instance)
3. Dell - ETACS Decoder Devices 


If anyone has an idea for this problem, please share it with us.


Thanks


Attached Files Thumbnail(s)
                   
Quote this message in a reply
03-05-2019, 07:54 AM, (This post was last modified: 03-05-2019, 07:56 AM by mattydr67.)
Post: #2
RE: VCI not connected to DiagBox PC
Just try to plugg it in other USB port.
Or uninstall and delete the ETACS driver
Then plug the VCI and see what happend. Install the driver manually.
This is at what I think.
I never had this issue no matter in which computer I installed.
And now I cannot even try because I am using Diagbox v9.xx in Win 7
Good luck
Quote this message in a reply
03-05-2019, 08:19 AM,
Post: #3
RE: VCI not connected to DiagBox PC
upgrade firmware
Quote this message in a reply
03-05-2019, 18:08 PM,
Post: #4
RE: VCI not connected to DiagBox PC
@mattydr67

you sent a logical answer to my problem ..

I'm trying to do it all. Uninstall ETACS driver and change USB, but when I reconnect the device the same problem arises. I tryed to instal manualy ACTIA USB Com Board Evolution Driver (Multi-Instance) driver but Device Manager says it's ETACS Decoder Devices - ACTIA Evol XS for ETACS Decoder 2


@nack76

Firmware is Ok. V4.3.2 works well with V7.57 DiagBox


I'm asking for some more suggestion and advice
Quote this message in a reply
03-05-2019, 19:03 PM, (This post was last modified: 03-05-2019, 19:07 PM by mattydr67.)
Post: #5
RE: VCI not connected to DiagBox PC
If you cannot install the correct driver that it is working for you in the other computers you camnot do much more.
The point is that the drivers not be installed automatically. And you have to install it manually. If its possible. If its not possible then Iyou can try to make an acronis image of one of your computer where everythings is ok and install it in the one where isn't works.
Then install only that computers system drivers.
Or start again from scartch again and install PSA XS Evolution correct drivers imediatlly after v7.02 is installed.
It could be a waist of time but I don't have anything else in my mind now. As I said I hadn't this issue anymore. No matter in which computer I installed the correct drivers was allocated for the VCI
Good luck
Quote this message in a reply
[+] 1 user says Thank You to mattydr67 for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  PSA Diagbox VCI Interfaces alexturbo 18 6,452 27-12-2023, 21:45 PM
Last Post: apol
PPeugeot DIAGBOX 2021 9.85 FULL INSTALATION akli 6 2,534 26-12-2023, 20:21 PM
Last Post: Le-Mans
PCitroen DIAGBOX online walczaklu 10 8,539 03-12-2023, 12:57 PM
Last Post: mattydr67
  DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) Simple 33 35,296 22-11-2023, 06:16 AM
Last Post: Jeppo
PPeugeot Diagbox 9.129 activation request dadoa4 4 2,348 09-11-2023, 09:59 AM
Last Post: bovhec
  diagbox 9.150 stasi 5 2,038 16-09-2023, 19:41 PM
Last Post: stasi
  DiagBox Language Change Simple 16 17,331 14-09-2023, 10:01 AM
Last Post: żarówka
  DIAGBOX help needed installing mars2moon 4 995 23-07-2023, 18:45 PM
Last Post: J415UNNY
PPeugeot Diagbox 9.91 VmWare gabi2008 6 4,176 23-07-2023, 18:42 PM
Last Post: J415UNNY
  diagbox latest ? Chad69 1 821 09-06-2023, 22:28 PM
Last Post: simo2k

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content