Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
FSTool Import Issues - 6F and 9C Only
05-05-2019, 02:37 AM,
Post: #1
|
|||
|
|||
FSTool Import Issues - 6F and 9C Only
Hi Everyone!
I was successfully able to activate my CIC with FSTool and intel123's script! I currently have the navigation and voice recognition working perfectly. However, I cannot re-activate my satellite radio or BMW Apps. I paid for a lifetime Sirius subscription (non transferable) so I need to get this radio to work again. I have attached a screenshot of me trying to import the cert and FSC; it won't load into the CIC. When I run a "get status" job, it can't find the original FSC on the uniit. However, ISTA seems to be able to locate it. I have FSTool's parameters set to 63,6F,1. Is there a different address I should be using? The BMW Apps (9C) is doing the same thing. I assume it's an FSTool issue as Sirius was working fine before, but cannot read/write to the original FSC. Would anyone have any input? Also, what is "2D" as seen in ISTA? Thank you! |
|||
05-05-2019, 09:58 AM,
(This post was last modified: 05-05-2019, 10:00 AM by emhtuning.)
Post: #2
|
|||
|
|||
RE: FSTool Import Issues - 6F and 9C Only
you can't have a mixture of OEM and custom FSC files in one headunit , when you use intel's patch and custom FSC files then your OEM Sirius FSC will not work and CIC will not accept it .
you choose what most important for you and live with it . or contact Intel and see if a custom Sirius FSC an be added to his CIC patch files . |
|||
05-05-2019, 14:12 PM,
Post: #3
|
|||
|
|||
RE: FSTool Import Issues - 6F and 9C Only
(05-05-2019, 09:58 AM)emhtuning Wrote: you can't have a mixture of OEM and custom FSC files in one headunit , when you use intel's patch and custom FSC files then your OEM Sirius FSC will not work and CIC will not accept it . Thank you! His files include a custom 6F FSC as well. I was finally able to get FSTool to read the original 6F and 9C certs in the CIC - I had to update the carserver files to newer versions. I successfully imported 9C, and the BMW Apps are working! But, I still cannot import 6F. I have attached the "Get Status" screen, the old FSC is still installed. Is there an error reference code that I can look up in the car server? Thanks! |
|||
06-05-2019, 03:15 AM,
(This post was last modified: 06-05-2019, 12:10 PM by Clusters.)
Post: #4
|
|||
|
|||
RE: FSTool Import Issues - 6F and 9C Only
I'm thinking it's because I need a newer version of FSTools than 2.0.2; does anyone know where I can find this? Carserver error is 2090.
Thanks! |