Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved - Renault 1.5 DDCR reading/writing
22-10-2017, 17:25 PM,
(This post was last modified: 30-10-2017, 07:29 AM by autoport.)
Post: #1
|
|||
|
|||
Solved - Renault 1.5 DDCR reading/writing
Please, I need to read/write this ecu on the bench with kess:
are this pins correct? I don`t want to burn it Connector A pin G1 12V+ pin G4 0V pin B4 K line many thanks for the help and best regards |
|||
22-10-2017, 17:55 PM,
Post: #2
|
|||
|
|||
RE: Renault 1.5 DDCR reading/writing
(22-10-2017, 17:25 PM)autoport Wrote: Please, I need to read/write this ecu on the bench with kess: here it is !!! |
|||
Reputation: +1 - autoport [+1] | |||
22-10-2017, 18:09 PM,
(This post was last modified: 22-10-2017, 18:33 PM by autoport.)
Post: #3
|
|||
|
|||
RE: Renault 1.5 DDCR reading/writing
Thanks mate, I have that info too but the 5 k resitor to ecu board is confusing me.
that, I think is not a DDCR from renault. |
|||
23-10-2017, 08:09 AM,
Post: #4
|
|||
|
|||
RE: Renault 1.5 DDCR reading/writing
Thanks mate but the video is not showing the connection.
I will use this and see if it`s ok Connector A pin G1 12V+ pin G4 0V pin B4 K line |
|||
30-10-2017, 07:28 AM,
Post: #5
|
|||
|
|||
RE: Renault 1.5 DDCR reading/writing
This is the pinout I used:
|
|||
20-03-2018, 20:44 PM,
Post: #6
|
|||
|
|||
RE: Solved - Renault 1.5 DDCR reading/writing
I am trying to get 2 days to write with Kess, but I have made a mistake in speed. I have not connected the resistance in K-line because I did not realize where to connect.
|
|||
06-05-2019, 22:36 PM,
Post: #7
|
|||
|
|||
RE: Solved - Renault 1.5 DDCR reading/writing
Is it necessary to open the ECU to put mass on eprom pin 24? or can I make it closed if yes can someone tell me?
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content