Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

VAS 6154 Clone Not detecting in ODIS 4.3.3 or 5.0.6
07-05-2019, 11:48 AM,
Post: #1
ZVW  VAS 6154 Clone Not detecting in ODIS 4.3.3 or 5.0.6
Hello ! 

Please help me with a problem . Recentlly i installed odis 4.3.3 . I leave original softing folder and after that i install VAS Driver 1.20.040.1708 VAS Config . I remember when it works , shows me  at diagnostic " VW Odis " and version 1.20.040.  

Now shows me like an screenshot VW ODIS 6154 for win 10 and when i launched software , i didnt see ignition and software not recognised device..

Someone knows or have Softing folder comaptibile with Windows 7 and with Odis 4.3.3  for VAS 6154

I tried to install manually  Softing D-PDU API for VCIs V1.20.040 but without solution. 

THANKS !! handshake


Attached Files Thumbnail(s)
       
Quote this message in a reply
07-05-2019, 13:20 PM, (This post was last modified: 07-05-2019, 13:26 PM by PopDog.)
Post: #2
RE: VAS 6154 Clone Not detecting in ODIS 4.3.3 or 5.0.6
The VAS6154 Clone is a crappy VCXNano which emulates a VAS5054. So if you install ODIS you have to select VAS5054... It has nothing to do with an VAS6154.

What you can do now:
Remove whole ODIS-S and if installed ODIS-E and everything called VAS or I+ME Actia installation, remove VCX Nano (Fake VAS6154 Drivers and Software),
over Software in System Settings, then reboot.

Remove Folders in C:\Program Files(x86) and C:\Program Files from ODIS-Engineering/Service, I+ME Actia, Softing, VCX Nano Software(e.g VAS?).

Then you can restart installation, don't install ODIS-Engineering it will not work with this Fake VAS6154, you can not flash with it, you will fail.

Also use Windows 7 for ODIS 4.3.3 or 5.0.6. - In Win10 you can not choose anymore VAS5054 Interface in 5.0.6 Setup, maybe also missing in 4.3.3 Setup.

Install first ODIS-Service, select Standard Notebook/PC, Interface : VAS5054, completely with Launcher. After that install the VCX Nano(Fake 6154 Software and Drivers) and after that Start ODIS-Service and install Postsetup. Then it should work.

When you don't remove the Software of the Fake 6154 Clone, you will run into the same problems as now. Once I had to install ODIS-S 2 times, because i didn't remove the software of this VAS6154 Fake.

If my answer helped to fix anything, then don't forget to give me some rep please! 
Quote this message in a reply
[+] 4 users say Thank You to PopDog for this post
14-05-2019, 06:32 AM,
Post: #3
RE: VAS 6154 Clone Not detecting in ODIS 4.3.3 or 5.0.6
(07-05-2019, 13:20 PM)PopDog Wrote:  The VAS6154 Clone is a crappy VCXNano which emulates a VAS5054. So if you install ODIS you have to select VAS5054... It has nothing to do with an VAS6154.

What you can do now:
Remove whole ODIS-S and if installed ODIS-E and everything called VAS or I+ME Actia installation, remove VCX Nano (Fake VAS6154 Drivers and Software),
over Software in System Settings, then reboot.

Remove Folders in C:\Program Files(x86) and C:\Program Files from ODIS-Engineering/Service, I+ME Actia, Softing, VCX Nano Software(e.g VAS?).

Then you can restart installation, don't install ODIS-Engineering it will not work with this Fake VAS6154, you can not flash with it, you will fail.

Also use Windows 7 for ODIS 4.3.3 or 5.0.6. - In Win10 you can not choose anymore VAS5054 Interface in 5.0.6 Setup, maybe also missing in 4.3.3 Setup.

Install first ODIS-Service, select Standard Notebook/PC, Interface : VAS5054, completely with Launcher. After that install the VCX Nano(Fake 6154 Software and Drivers) and after that Start ODIS-Service and install Postsetup. Then it should work.

When you don't remove the Software of the Fake 6154 Clone, you will run into the same problems as now. Once I had to install ODIS-S 2 times, because i didn't remove the software of this VAS6154 Fake.

Friend, in case that i must need to install it into W10, i did the installation and all was done without errors, including intall the VCX driver (the program recognize my vas6154, and the button "Run" is available and open the odis) but the problem in connect to the car persist..

do you know what can be?
Quote this message in a reply
17-05-2019, 10:49 AM,
Post: #4
RE: VAS 6154 Clone Not detecting in ODIS 4.3.3 or 5.0.6
Someone solution for fake VAS 6154 ?? I cannot make compatibble with odis 4.3.3 , not detect ignition and device in software ??

Anyone know how to fix ?
Quote this message in a reply
05-06-2019, 09:06 AM,
Post: #5
RE: VAS 6154 Clone Not detecting in ODIS 4.3.3 or 5.0.6
My fake 6154 work on win10 64. Only with odis install device choice passthru device. VAS Driver 1.20.040 download latest firmware 1.5.5? and passthru driver (3.0.3?) Only via USB. In odis you must setup device. Sorry for my english
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
00Windows ODIS-Service 6.2.0 Postsetup 4080 (test) Tadk 172 12,206 1 hour ago
Last Post: Tadk
  ODIS-Service_update_23_0_1-EU_20240326_Postsetup_230001.105.1210_test Tadk 275 16,493 1 hour ago
Last Post: Tadk
0Scope ODIS-Service 7.2.1 Postsetup 4080 (test) Tadk 1,019 97,694 1 hour ago
Last Post: Tadk
Lamborghini ODIS Service 23.2.2 + Activations justdiag 49 2,731 Yesterday, 18:32 PM
Last Post: billyleon
0Scope ODIS-Engineering 12.2 Postsetup 1060 (test) Tadk 260 33,321 Yesterday, 08:58 AM
Last Post: Versus
ZTAudi Audi A6 2024 seat belt warning deactivate with odis samiralena 3 121 Yesterday, 06:58 AM
Last Post: samiralena
0Scope ODIS JVM/JRE STARTUP ERROR FIX DavidForgac 1 567 25-03-2024, 06:50 AM
Last Post: wxhank
ZVW ODIS-S23 ODIS-E17 FULL no encryption chinese patch Chipcar 3 938 14-03-2024, 20:25 PM
Last Post: gyozo75
ZVW Odis Engineering 14 + Activations fantomel 345 39,347 11-03-2024, 21:27 PM
Last Post: koyot
ZTAudi ODIS-E, iDEX, CP-Tool, System42, web42 ieee754 0 256 11-03-2024, 20:22 PM
Last Post: ieee754

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content