[dncomputech]

Hello.
I have 2016 F10 without HBA button on leaf column and In FA also do not have 522/552 Xenon Light. But the car has a Xenon Light lamp according to the factory.
https://drive.google.com/file/d/1tM4DLMFIIHG-SoIdzmYzYTYXDu_WUEMV/view?usp=sharing

I plan to equip HBA. I have Mirror purchased on ebay.
https://drive.google.com/file/d/1NHeSUnDSo_WQ1iwR8FQGfXWitjRWP8ot/view?usp=sharing

I plan to equip the HBA separately and do not replace the whole cluster as I see there are 3 wires (Yellow-Red-Orange) in order and plug socket identical. Does it work when the steering column is installed?

https://drive.google.com/file/d/1oq20vx4...sp=sharing
https://drive.google.com/file/d/1eXYb0hc...sp=sharing

Or I was wrong and needed to buy the steering column.

https://drive.google.com/file/d/1zSfERyw...sp=sharing

Thank you very much.
English translated from google

[zeronoo]

hba can work without hba button on f10, just a code line in frm, otherwise i think you will need the whole szl

[dncomputech]

hba can work without hba button on f10, just a code line in frm, otherwise i think you will need the whole szl

Thank you for responding
In my opinion, I edit FLD for ECU FRM
3050 FRM_AUSSENLICHT_PARAMETER, 30 >>> FLA_AUTO_AKTIV >>> automatisch (automatically) = 01
is it works without the HBA push button on the steering cluster
Let me ask more. If so, how do I switch off HBA?

[emhtuning]

if you want full control then you need to make proper retrofit with button , coding works only if F10 to have the HBA auto on as soon as the auto lights is triggered too .

if there is no 522 then there is no Xenon , 90% chance that HBA wont work even you retrofit it 100% as OEM .

and the picture you posted of the car FA , car has LED fog lights but nothing mentioned about 522 at least . 522 is monetary for HBA to work as far as I know . maybe I am totally wrong

[dncomputech]

if you want full control then you need to make proper retrofit with button , coding works only if F10 to have the HBA auto on as soon as the auto lights is triggered too .

if there is no 522 then there is no Xenon , 90% chance that HBA wont work even you retrofit it 100% as OEM .

and the picture you posted of the car FA , car has LED fog lights but nothing mentioned about 522 at least . 522 is monetary for HBA to work as far as I know . maybe I am totally wrong

Thank you very much. You are not wrong.
But I'm 99.99% sure when I buy the FA car I don't have 522/552.But I have Xenon Light and it's automatic when the light is low.
Fa Factory and FA present
https://drive.google.com/file/d/1IcCeOXN...sp=sharing
 
Each shadow is 01 (outside the big light) and works near and far away , while the small shadow does not work, it only takes shape (no shadow in it).
Right lamp
https://drive.google.com/file/d/12hF8z29...sp=sharing
https://drive.google.com/file/d/1WYcHuPw...sp=sharing
https://drive.google.com/file/d/1vZPYh85...sp=sharing
https://drive.google.com/file/d/1VLcKELL...sp=sharing
Left lamp
https://drive.google.com/file/d/1cY28bjh...sp=sharing
https://drive.google.com/file/d/1avzB4qO...sp=sharing
https://drive.google.com/file/d/1cYIIEew...sp=sharing
https://drive.google.com/file/d/1dH-Ldhr...sp=sharing

1./. I also have equipped NBTevo (G30) + CID (G11), and RDC works great, but I still keep the factory FA (not changing S606 to S609 and not adding 2VB). I only VO cooding the relevant ECU when retrofitting with my own FA with S609 and 2VB but I don't write it to the car

https://drive.google.com/file/d/1MarfcDN...sp=sharing
https://drive.google.com/file/d/1mOV5eR6...sp=sharing
https://drive.google.com/file/d/1vYLar_g...sp=sharing
https://drive.google.com/file/d/10e70AEA...sp=sharing
2. / When is my car Xenon Light without adaptation? Has anyone successfully equipped HBA (FLA) with Xenon Light without F10 adaptation?

[claw]

After 7/2013 all F10/F11 have at least xenon headlights (no more halogen), so SA522 is not necessary anymore, and is not present in FA.

[emhtuning]

yes exactly as claw said , sorry i didn't see that car is F10 LCI , xenon is standard from factory therefor there is no 522 and yes HBA works 100% even without adaptive headlights ..

the difference is that with adaptive headlights and HBA , you get VLD (Variable Light Distribution) . without adaptive headlights you get Generation 1 HBA

[dncomputech]

yes exactly as claw said , sorry i didn't see that car is F10 LCI , xenon is standard from factory therefor there is no 522 and yes HBA works 100% even without adaptive headlights ..

the difference is that with adaptive headlights and HBA , you get  VLD (Variable Light Distribution) . without adaptive headlights you get Generation 1 HBA

Thank you very much again.
But Doesn't the HBA button on the steering cluster. I can still cooding
FLD for ECU FRM
3050 FRM_AUSSENLICHT_PARAMETER, 30 >>> FLA_AUTO_AKTIV >>> automatisch (automatically) = 01. Will it automatically turn on HBA when I fix the engine and switch my lights in automatic position?
I'm just having a hard time where the button I want to block is HBA.
I am also investigating here

https://www.newtis.info/tisv2/a/en/f10-5...ing-column- switch-cluster-szl / XUo0v4i
I plan to try this weekend

[emhtuning]

if it is your own car then temporary finish the retrofit with coding , if you want to stop AUTO HBA simply don't put the light switch on AUTO LIGHT lool

[dncomputech]

if it is your own car then temporary finish the retrofit with coding , if you want to stop AUTO HBA simply  don't put the light switch on AUTO LIGHT lool

I'm not lucky or do I lack something?
Note: Currently I do not install the most HBA button on the steering cluster
This wiring diagram is partly because I make one part I get from (https://www.newtis.info). I make it my own car and I'm not responsible for it being compatible with other cars.
1. / loop wiring diagram
Mirror according to vehicle (factory) A60 has 3 wires like New Mirror position (Pin 3-6-10)
The new mirror has 6 positions, 3 of which are similar to the old Mirror. I searched on the newtis web. I speculated that position 4-5 was for K-Can2. But do not see foot position 9
https://www.newtis.info/tisv2/a/en/f10-5...t/IzAprhcL

https://drive.google.com/file/d/1ElwaOg0...sp=sharing

2. / Ignore foot position 9. I loop the wiring diagram for K-Can2 for position 4-5 that my car does not have, K-can2 is taken from the ECU Junction box

https://drive.google.com/file/d/10-s6ct8...sp=sharing

3. / Programming FLA
Connecting the car to the open PC E-sys I saw ECU FLA3 (5f) but did not see the cafd
I did not write 5AC to my FA car, but I have my own FA which has 5AC (correct Vin my car) and activated. Read (VCM). Select ECU FLA3 >> Detect CAF for SWE >> select the latest one >> OK >> Code work successfully. I had CAFD for FLA3

https://drive.google.com/file/d/1trTHxVM...sp=sharing

I do not VO coding but I Edit FDL because NBTevo page with errors with Vo coding can only Edit FDL.

- ECU NBTevo
HIGH_BEAM_ASSISTANT >>> aktiv
But it doesn't work with my NBTevo. I aktiv but NBTevo Menu does not see any place to select High-beam assistant (Entrynav, there is High-beam assistant menu).

- ECU FRM
FLA_VERBAUT = aktiv
FLA_AUTO_AKTIV = automatisch

- ECU KOMBI L6 BO
ST_MAB_ASST_APPL = aktiv
ST_MAB_ASST_TIMEOUT = aktiv

https://drive.google.com/file/d/1HfXc9SV...sp=sharing

The results are all successful and the HBA icon appears in the watch (6WA). But when the vehicle was turned off and the car started again, it did not appear again.

https://drive.google.com/file/d/15hLn7pv...sp=sharing

I have switched in the Auto-Off -Auto light switch that does not show up. I ran a test of a 60km / h section without appearing
Where do I miss, or where is it wrong?