Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Esys Pro failed to flash FEM without errors : Error in VCM Update
09-05-2019, 16:33 PM,
Post: #1
|
|||
|
|||
Esys Pro failed to flash FEM without errors : Error in VCM Update
Can anyone help me:
I use ICOM with Esys Pro to flash FEM-GW & FEM-BDC in ID BASE ROW: i checked: boxes in blFlash, swDeploy, cdDeploy, ibaDeploy, and Gateway columns. Press Check software availability Press Start and it will proceed with processing TAL to flash FEM with new firmware TAL execution started. ExecutionID=2019/05/09-16:15:42.256 TAL-Execution finished with status: "Finished". [C207] TAL execution finished. Duration: "5min 28s". [C206] MSM update: Read current SVT. [C194] MSM update started. [C215] MSM update finished. [C216] VCM Update: Write FA to VCM. [C188] VCM Update: Write FP to VCM. [C190] VCM Update: Write integration levels to VCM. [C186] VCM Update: Read current SVT. [C191] VCM Update: Check current SVT with TAL. [C192] VCM Update: Write target SVT. [C193] VCM Update: Write FA to backup. [C189] VCM Update: finished with error. [C196] Error in VCM Update: [] - [Exception - VCM_BACKUP - 40] job failed with negative response error: code: service returned global negative response description: Service WDBI_FA1 returned a negative response with response code requestOutOfRange; LinkName: VCM_BACKUP_ETHERNET severity: ERROR Write FA to the Backup Partner failed. Possibly there is no connection to the Backup Partner. [C097] job failed with negative response error: code: service returned global negative response description: Service WDBI_FA1 returned a negative response with response code requestOutOfRange; LinkName: VCM_BACKUP_ETHERNET severity: ERROR [433] Now my cluster not responding and lights are gone, but i can still start the car. |
|||
09-05-2019, 16:38 PM,
Post: #2
|
|||
|
|||
RE: Esys Pro failed to flash FEM without errors : Error in VCM Update
Which E-SYS are you using? Don't use any launcher (TM, ESYSX, PLUS etc) for flashing. Did you use original FA that comes with car?
|
|||
09-05-2019, 16:40 PM,
(This post was last modified: 09-05-2019, 16:44 PM by Chriz.)
Post: #3
|
|||
|
|||
RE: Esys Pro failed to flash FEM without errors : Error in VCM Update
Wrong FA or selected Wrong Target Connection?
|
|||
09-05-2019, 19:07 PM,
(This post was last modified: 09-05-2019, 19:11 PM by BMWF01.)
Post: #4
|
|||
|
|||
RE: Esys Pro failed to flash FEM without errors : Error in VCM Update
(09-05-2019, 16:38 PM)sqorpius Wrote: Which E-SYS are you using? Don't use any launcher (TM, ESYSX, PLUS etc) for flashing. Did you use original FA that comes with car?Yes i read and save Original FA and write to new FEM and it write it o new fem without errors. FEM-BDC is ok but FEB-ZGM in red in istad. The esys Pro 2.8.2 im using, is that ok? (09-05-2019, 16:40 PM)Chriz Wrote: Wrong FA or selected Wrong Target Connection?The BMW is an F15, so i selected target as F025 in the target selector in Esys. Is that OK bro? |
|||
09-05-2019, 20:40 PM,
(This post was last modified: 09-05-2019, 20:42 PM by iyade46.)
Post: #5
|
|||
|
|||
RE: Esys Pro failed to flash FEM without errors : Error in VCM Update
flash with blFlash, swDeploy, only it should work
if you have teamviwer i can remotely help you |
|||
09-05-2019, 22:43 PM,
(This post was last modified: 09-05-2019, 22:43 PM by BMWF01.)
Post: #6
|
|||
|
|||
RE: Esys Pro failed to flash FEM without errors : Error in VCM Update
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content