[BMWF01]

Can anyone help me:
I use ICOM with Esys Pro to flash FEM-GW & FEM-BDC

in ID BASE ROW: i checked: boxes in blFlash, swDeploy, cdDeploy, ibaDeploy, and Gateway columns.
Press Check software availability
Press Start and it will proceed with processing TAL to flash FEM with new firmware

TAL execution started.
ExecutionID=2019/05/09-16:15:42.256
TAL-Execution finished with status: "Finished". [C207]
TAL execution finished. Duration: "5min 28s". [C206]
MSM update: Read current SVT. [C194]
MSM update started. [C215]
MSM update finished. [C216]
VCM Update: Write FA to VCM. [C188]
VCM Update: Write FP to VCM. [C190]
VCM Update: Write integration levels to VCM. [C186]
VCM Update: Read current SVT. [C191]
VCM Update: Check current SVT with TAL. [C192]
VCM Update: Write target SVT. [C193]
VCM Update: Write FA to backup. [C189]
VCM Update: finished with error. [C196]
Error in VCM Update:
[] - [Exception - VCM_BACKUP - 40] job failed with negative response error: 
 code: service returned global negative response
 description: Service WDBI_FA1 returned a negative response with response code requestOutOfRange; LinkName: VCM_BACKUP_ETHERNET
 severity: ERROR

Write FA to the Backup Partner failed. Possibly there is no connection to the Backup Partner. [C097]
job failed with negative response error: 
 code: service returned global negative response
 description: Service WDBI_FA1 returned a negative response with response code requestOutOfRange; LinkName: VCM_BACKUP_ETHERNET
 severity: ERROR
 [433]

Now my cluster not responding and lights are gone, but i can still start the car.

[sqorpius]

Which E-SYS are you using? Don't use any launcher (TM, ESYSX, PLUS etc) for flashing. Did you use original FA that comes with car?

[Chriz]

Wrong FA or selected Wrong Target Connection?

[BMWF01]

Which E-SYS are you using? Don't use any launcher (TM, ESYSX, PLUS etc) for flashing. Did you use original FA that comes with car?

Yes i read and save Original FA and write to new FEM and it write it o new fem without errors. FEM-BDC is ok but FEB-ZGM in red in istad.

The esys Pro 2.8.2 im using, is that ok?

---

Wrong FA or selected Wrong Target Connection?

The BMW is an F15, so i selected target as F025 in the target selector in Esys.

Is that OK bro?

[iyade46]

flash with blFlash, swDeploy, only it should work

if you have teamviwer i can remotely help you

[BMWF01]

flash with blFlash, swDeploy, only it should work

if you have teamviwer i can remotely help you

Tomorrow i will contact you.
How about the Gateway flash for FEM-GW