Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. ATM - Balkan

    atm balkan file service
  2. MHR TuninG

  3. MOD FILES

  4. TPT TUNING

  5. Soft Platform



Simos PC2.1 communication error
14-05-2019, 08:12 AM,
Post: #11
RE: Simos PC2.1 communication error
what do you mean by bricked? cuz many times ecu can be revived with right tools/knowledge

Fileservice Dyno Tested: Stage 1,2,3 , Manual: DPF off, EGR off, AdBlue off, DTC off...

PHOTOS:
http://www.tuning-makarska.com/en
Skype: jure.coric_1

[Image: check_evc_license_image.asp?k=RZDnOUoAMy...6hgw%3d%3d]
Tested on my 2WD SportDevices Dynamometer



Quote this message in a reply
14-05-2019, 09:02 AM,
Post: #12
RE: Simos PC2.1 communication error
I got the message "communication problem" in kess, Fgtech and VCP PRO. Have only tried to unlock with the one adapter "simos PC2.1 unlock" from the 22 piece adapter kit I've bought with the stainless steel BDM Frame. After this didn't work, I checked the adapter, and there is some totally wrong soldering....

cash Learning by doing, learning by reading, learning by learning drive use the thx and reputation if my answers you

Quote this message in a reply
14-05-2019, 09:33 AM,
Post: #13
RE: Simos PC2.1 communication error
connect to the ecu directly using resistors and see if it can be read, if not then yes likely you have damaged ecu by using this adapter if you say it have 'wrong soldering'

learn and next time check adapter before connecting sad

i am all for adapters but 90% of time, i just solder

i always tell it how it is wink
Quote this message in a reply
14-05-2019, 10:42 AM,
Post: #14
RE: Simos PC2.1 communication error
(14-05-2019, 09:02 AM)Willinickersen Wrote:  I got the message "communication problem" in kess, Fgtech and VCP PRO. Have only tried to unlock with the one adapter "simos PC2.1 unlock" from the 22 piece adapter kit I've bought with the stainless steel BDM Frame. After this didn't work, I checked the adapter, and there is some totally wrong soldering....

Fastest and easy job is buy working ecu with same hw and sw and mount it on car then go to official dealer to restore...otherwise look for someone with Avdi to do job. Pcr 2.1 first time read bdm then unlock and write forever by obd, in extreme case flash ori file and car starts everytime u want!

[Image: ldpaoub209f.png]

Quote this message in a reply
15-05-2019, 06:55 AM, (This post was last modified: 15-05-2019, 07:01 AM by Willinickersen.)
Post: #15
RE: Simos PC2.1 communication error
(14-05-2019, 09:33 AM)8baller Wrote:  connect to the ecu directly using resistors and see if it can be read, if not then yes likely you have damaged ecu by using this adapter if you say it have 'wrong soldering'

learn and next time check adapter before connecting sad

i am all for adapters but 90% of time, i just solder

Thank you for your reply. 
I am not quite sure what you mean by connecting directly using resistors?

(14-05-2019, 10:42 AM)blackTDI Wrote:  
(14-05-2019, 09:02 AM)Willinickersen Wrote:  I got the message "communication problem" in kess, Fgtech and VCP PRO. Have only tried to unlock with the one adapter "simos PC2.1 unlock" from the 22 piece adapter kit I've bought with the stainless steel BDM Frame. After this didn't work, I checked the adapter, and there is some totally wrong soldering....

Fastest and easy job is buy working ecu with same hw and sw and mount it on car then go to official dealer to restore...otherwise look for someone with Avdi to do job. Pcr 2.1 first time read bdm then unlock and write forever by obd, in extreme case flash ori file and car starts everytime u want!
I have read on bench by Kess, before I tried to unlock. 
I have bought another ECU with same part number, same HW number

cash Learning by doing, learning by reading, learning by learning drive use the thx and reputation if my answers you

Quote this message in a reply
15-05-2019, 10:42 AM,
Post: #16
RE: Simos PC2.1 communication error
I
(15-05-2019, 06:55 AM)Willinickersen Wrote:  
(14-05-2019, 09:33 AM)8baller Wrote:  connect to the ecu directly using resistors and see if it can be read, if not then yes likely you have damaged ecu by using this adapter if you say it have 'wrong soldering'

learn and next time check adapter before connecting sad

i am all for adapters but 90% of time, i just solder

Thank you for your reply. 
I am not quite sure what you mean by connecting directly using resistors?

(14-05-2019, 10:42 AM)blackTDI Wrote:  
(14-05-2019, 09:02 AM)Willinickersen Wrote:  I got the message "communication problem" in kess, Fgtech and VCP PRO. Have only tried to unlock with the one adapter "simos PC2.1 unlock" from the 22 piece adapter kit I've bought with the stainless steel BDM Frame. After this didn't work, I checked the adapter, and there is some totally wrong soldering....

Fastest and easy job is buy working ecu with same hw and sw and mount it on car then go to official dealer to restore...otherwise look for someone with Avdi to do job. Pcr 2.1 first time read bdm then unlock and write forever by obd, in extreme case flash ori file and car starts everytime u want!
I have read on bench by Kess, before I tried to unlock. 
I have bought another ECU with same part number, same HW number


Post the bdm read that u did here, maybe u locked ecu writing bad file. With new ecu u need adapting to car and storing keys, I think that VAS can do the job or VCP too but not sure..

[Image: ldpaoub209f.png]

Quote this message in a reply
15-05-2019, 11:53 AM,
Post: #17
RE: Simos PC2.1 communication error
I'm not sure if you have read what I've wrote @blackTDI...I haven't written anything to the ECU.....

cash Learning by doing, learning by reading, learning by learning drive use the thx and reputation if my answers you

Quote this message in a reply
16-05-2019, 10:56 AM, (This post was last modified: 16-05-2019, 20:30 PM by Willinickersen.)
Post: #18
ZVW  RE: Simos PC2.1 communication error
(15-05-2019, 10:42 AM)blackTDI Wrote:  I
(15-05-2019, 06:55 AM)Willinickersen Wrote:  
(14-05-2019, 09:33 AM)8baller Wrote:  connect to the ecu directly using resistors and see if it can be read, if not then yes likely you have damaged ecu by using this adapter if you say it have 'wrong soldering'

learn and next time check adapter before connecting sad

i am all for adapters but 90% of time, i just solder

Thank you for your reply. 
I am not quite sure what you mean by connecting directly using resistors?

(14-05-2019, 10:42 AM)blackTDI Wrote:  
(14-05-2019, 09:02 AM)Willinickersen Wrote:  I got the message "communication problem" in kess, Fgtech and VCP PRO. Have only tried to unlock with the one adapter "simos PC2.1 unlock" from the 22 piece adapter kit I've bought with the stainless steel BDM Frame. After this didn't work, I checked the adapter, and there is some totally wrong soldering....

Fastest and easy job is buy working ecu with same hw and sw and mount it on car then go to official dealer to restore...otherwise look for someone with Avdi to do job. Pcr 2.1 first time read bdm then unlock and write forever by obd, in extreme case flash ori file and car starts everytime u want!
I have read on bench by Kess, before I tried to unlock. 
I have bought another ECU with same part number, same HW number


Post the bdm read that u did here, maybe u locked ecu writing bad file. With new ecu u need adapting to car and storing keys, I think that VAS can do the job or VCP too but not sure..

I have fixed this problem, tried to backup the old ECU with ktag, and an new unlock adapter... This worked!


Attached Files Thumbnail(s)
   

cash Learning by doing, learning by reading, learning by learning drive use the thx and reputation if my answers you

Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  BMW E63 ME9.2 Kess error mugenman1111 2 125 05-05-2019, 14:13 PM
Last Post: mugenman1111
ZVW Solved ✔ Simos prc2.1 boot pin tin removed for error :( HELP! zzapp 10 2,922 05-05-2019, 08:06 AM
Last Post: Willinickersen
ZTAudi audi 3.0tfsi simos 8.41 pops rapidtuning 0 93 28-04-2019, 18:42 PM
Last Post: rapidtuning
  Simos 18 and Kess 5.017 With K-Suite 2.47 Mr Infinity 3 592 27-04-2019, 18:30 PM
Last Post: batja
  Kess v2 Error in addressing the writing DieselBoost 2 187 22-04-2019, 17:04 PM
Last Post: DieselBoost
VToyota Kess v2 wake up error for toyota HYtuner 1 496 19-04-2019, 07:39 AM
Last Post: waqar_vk
  Ktag - The tool is not powered correctly error, is it dead? amit_talkin 3 163 17-04-2019, 15:04 PM
Last Post: busaman
JAlfa Alfa giulietta kess 5.017 problem "alarm clock error" edc16p mimmo-dj 2 103 15-04-2019, 15:01 PM
Last Post: mimmo-dj
LFord Ktag error while reading ECU with GPT cable amit_talkin 13 459 15-04-2019, 04:42 AM
Last Post: amit_talkin
  Remove DTC 16804 - 0420 Audi A4 Simos 3.4a tester2009 2 125 14-04-2019, 22:35 PM
Last Post: yudon

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content