Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

F10 F11 HUD retrofit part list
27-10-2019, 07:29 AM, (This post was last modified: 27-10-2019, 11:22 AM by nannou9.)
Post: #1
XZBMW  F10 F11 HUD retrofit part list
Hi all,

I am ordering parts for hud retrofit for my BMW F10 2015.
So far I have purchased:
- 6WB kombi 6210 9 363 263-01
- HUD 6815500

I am planning to order
- hsd repair lead 61119294364 to connect hud with kombi
- sound insulation frame 62309204859
- windshield for which there is discussion here: https://cartechnology.co.uk/showthread.php?tid=58217

Assuming above are correct and complete except mounting screws.
Now question- what are the screws part numbers as some people are suggesting nuts are also required which keeps me confused. 
This retrofit requires dashboard removal so I want to be sure I am well prepared as I don’t want to do that twice. 

Bummercat is suggesting part number 07147127027 for 3 screws needed. 
But it is not mentioning nuts. 
As far as I know I would need to drill?
Also is there anything else I am missing?

Can anybody who did hud retrofit can confirm what screws are needed?
I have limited trust to realoem/bimmercat and others as I have ordered screws which didn’t fit already in past. 

Thanks all
Quote this message in a reply
27-10-2019, 10:39 AM,
Post: #2
RE: F10 F11 HUD retrofit part list
You also need a new windshield
Quote this message in a reply
27-10-2019, 10:57 AM,
Post: #3
RE: F10 F11 HUD retrofit part list
(27-10-2019, 10:39 AM)atzebmw Wrote:  You also need a new windshield

That is correct. However my immediate problem are screws and mounting the hud. 
Windscreen is planned later.

Cheers
Quote this message in a reply
27-10-2019, 13:13 PM, (This post was last modified: 27-10-2019, 13:35 PM by rickardg.)
Post: #4
RE: F10 F11 HUD retrofit part list
I did this retrofit and can say that new windscreen is not needed.
It might be a very little bit less clear then after changing windscreen, but in my opinion a waste of money.
When you get a chip in your windscreen and need to change anyway, then change to the one for HUD...

No nuts needed, they are already there welded to the metal frame under dashboard. Dont remember if it was M6 or M8 bolts but i ordered the p/N from realoem and they where right 07147127027. You will also need the frame for the dashboard 51459209798 and 5 of the clips 51167151389
Quote this message in a reply
[+] 1 user says Thank You to rickardg for this post
27-10-2019, 20:20 PM,
Post: #5
RE: F10 F11 HUD retrofit part list
don't forget about Sensor rain/light/solar/condensation wink
Quote this message in a reply
27-10-2019, 20:33 PM,
Post: #6
XZBMW  RE: F10 F11 HUD retrofit part list
(27-10-2019, 13:13 PM)rickardg Wrote:  I did this retrofit and can say that new windscreen is not needed.
It might be a very little bit less clear then after changing windscreen, but in my opinion a waste of money.
When you get a chip in your windscreen and need to change anyway, then change to the one for HUD...

No nuts needed, they are already there welded to the metal frame under dashboard. Dont remember if it was M6 or M8 bolts but i ordered the p/N from realoem and they where right 07147127027. You will also need the frame for the dashboard 51459209798 and 5 of the clips 51167151389

Hi Mate. 

Thanks for your answer. It is very helpful. 
Do you know if I also need sound insulation element 62309204859?
Quote this message in a reply
29-10-2019, 07:28 AM, (This post was last modified: 29-10-2019, 07:29 AM by rickardg.)
Post: #7
RE: F10 F11 HUD retrofit part list
Hi,
Yes that ones also neded, its like a foam thing that fills the gap between dashboard and HUD.
Also just realise you prpbably in the UK, and the the P/N of the frame is different from the one i mentioned that is for a LHD car.
Best of luck, its a day of work taking dash out, cut it and bring it back in.
I used instructions in rheingold and only thing i made different was that its possible to leave the centre consoli in, you only need to take the fastening bolts out and move it slightly backwards. Saves some work not to take it out all together.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  G01 trailer hitch retrofit plugs kklobo 0 22 10 hours ago
Last Post: kklobo
XZBMW BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS intel123 890 462,601 Yesterday, 13:08 PM
Last Post: NeRkO20
  Car Systems / Custom Retrofit Garage ENBT Adapter Ulsmak 33 1,457 27-03-2024, 00:17 AM
Last Post: painsage
  G30 LCI Headlights retrofit: High Beam Laser light locking active tcp443 19 3,214 26-03-2024, 21:25 PM
Last Post: Satia
  G05 KAFAS4 enable code missing after Retrofit ACC 6ergsm 19 2,298 26-03-2024, 12:33 PM
Last Post: Hodgsonp
  F15 6WB Retrofit VIN Error moreply 4 182 25-03-2024, 07:24 AM
Last Post: RuleNormaliai
  MGU G30 retrofit , PDC does not show laso 3 174 24-03-2024, 14:35 PM
Last Post: laso
  Problem Retrofit electrified steering column on the G31 LCI smercki 12 338 22-03-2024, 12:55 PM
Last Post: Node
XZBMW BMW F01 Pre-LCI NBT EVO Retrofit Satia 3 215 21-03-2024, 12:53 PM
Last Post: Satia
  Bmw G31 retrofit Mgu id7 atm problem intranet 14 1,880 19-03-2024, 10:07 AM
Last Post: evaldazj

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content