Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Renew key with VVDI Key tool
11-05-2019, 21:17 PM,
Post: #1
XZBMW  Renew key with VVDI Key tool
I tried renew F series key with VVDI key tool,
but when I renew PCF remote control don't have a fraquency.
Car start but when i put remote to fraquency tester it does not broadcast the signal.
I tried on E series and I have the same problem.
Can anybady help or you have the same situation
Quote this message in a reply
12-05-2019, 09:23 AM,
Post: #2
RE: Renew key with VVDI Key tool
what you expect when writing FFFfff....
Quote this message in a reply
[+] 1 user says Thank You to Kinder for this post
12-05-2019, 09:51 AM,
Post: #3
RE: Renew key with VVDI Key tool
(12-05-2019, 09:23 AM)Kinder Wrote:  what you expect when writing FFFfff....
Well.

I thought is was renew and not erasing.
It that case, how to write approprite eeprom in PCF
Quote this message in a reply
12-05-2019, 13:54 PM,
Post: #4
RE: Renew key with VVDI Key tool
upload data first, then write, then lock protection
Quote this message in a reply
12-05-2019, 14:50 PM,
Post: #5
RE: Renew key with VVDI Key tool
(12-05-2019, 13:54 PM)Kinder Wrote:  upload data first, then write, then lock protection
Sorry but i don't understand you.
I use to write data for BMW- CGDI
I have VVDI key to and VVDI prog but don't have adaptor for PCF.
When i make delear key, key start ignition and start car but not have a fraquency
Quote this message in a reply
14-05-2019, 07:19 AM,
Post: #6
RE: Renew key with VVDI Key tool
I have seen this problem too. Renewed an F series key. It can start car but it lost frequency. I think it now explains why my renewed keys have no remote lock unlock!!
Quote this message in a reply
24-05-2019, 01:31 AM,
Post: #7
RE: Renew key with VVDI Key tool
Hawe you tryed renew in PCF adapter or in circuit?
Quote this message in a reply
06-08-2019, 19:00 PM,
Post: #8
RE: Renew key with VVDI Key tool
i try and pcf adapter and in circuit.
The adapter does not detect my chip in the adapter and erases and uploads the eeprom and erom in the circuit but there is no frequency all the time.
My adapter has a 0 ohm resistor.
I do everything through the MCU option as they recommend because the option REMOTE-> BMW-> F series receives a message that the file is of a different size than the memory.
I did through files for HUF and Continental.
Can anyone help me?
I write with VVDI prog and my PCF is 7953

SOLVED
You must write first Erom and next eeprom.
And this solution not change fraquency. 
You need to upload files only with which the key was originally.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
0Immo NEW EASY IMMO DOCTOR 2.1 Multi Immo Tool.+ KG ROD-BENDERS 44 10,065 17-03-2024, 14:52 PM
Last Post: kar407
  cas3 9389115 downgrade fail - vvdi keytoolplus motorsoft 2 115 14-03-2024, 10:08 AM
Last Post: sixcode
  OPEL grandland Med17.4.4 need pinout and recomand tool to read fadyeid 0 45 11-03-2024, 16:12 PM
Last Post: fadyeid
  Key Programming Tool koziol 1 126 06-03-2024, 07:22 AM
Last Post: TKservice
0Immo Car-Edit tool - dash ecu bsm srs immo ROD-BENDERS 31 8,386 05-03-2024, 21:01 PM
Last Post: keyzex
  VAG IMMO OFF TOOL for free josef1708 6 1,820 03-03-2024, 09:42 AM
Last Post: josef1708
KOpel Upa Script to read Opel Immo Pin 29F400 or tool meszol 0 95 08-02-2024, 12:09 PM
Last Post: meszol
HPorshe Porsche key fob 433mhz unlock renew drhg 6 186 04-02-2024, 23:34 PM
Last Post: drhg
  Tool to make BMW keys? Spirit5676 1 182 26-01-2024, 21:54 PM
Last Post: Inerceptor
0Immo LATEST IMMO SERVICE TOOL 1.2 - 2017 volavka 554 177,392 12-01-2024, 08:54 AM
Last Post: mars2moon

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content