Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. CarLabImmo


  3. Ecu-Service

Mazda VCM 2 problem
14-05-2019, 09:36 AM,
Post: #1
Mazda VCM 2 problem
I have original VCM2 mazda, the vci manager dont see it, when i reset it does.
But when i update the firmware and reboot the vcm  than manger dont see it anymore.
Any ideas?
Quote this message in a reply
14-05-2019, 12:38 PM, (This post was last modified: 14-05-2019, 12:40 PM by fantomel.)
Post: #2
RE: Mazda VCM 2 problem
use an older vcm manager and make recovery. preferably with a new SD card (max 2GB). Then remember that after each point of recovery to wait 2min (population of sd)

1. Press the plastic button (to the quiet click) but not much.
2. connect the +12 v supply through connector. (Continue to hold the button)
3. Wait a few seconds, the red light, but you must continue to hold the button.
When a beep sounds immediately release the button.
4. Wait about two minutes (visually nothing will happen), connect the USB cord from VCM2 to computer.
5. Start Bosh VCI MANAGER. Once connected, you will see your VCM2 in recovery mode.
6. click on "Restore" button and go to drink coffee, it takes about 40 minutes.
7. after flashing VCM2 automatically reboot.
(If, after repeated firmware situation BEEP 1 second, you can try to do firmware lower software version)
8. Wait 2 minutes.
9. unplug all cables from VCM2
10. Restart the computer, then will work ok smile

If you like my post and it helped you please press [Image: postbit_reputation.gif][Image: tyl_add.png]
Reputation: +2 - Renopower [+1] , svvag2000 [+1]
Quote this message in a reply
[+] 2 users say Thank You to fantomel for this post
14-05-2019, 12:48 PM,
Post: #3
RE: Mazda VCM 2 problem
Thank you fantomel, i did this but not help, the 2 minutes i din'd so i will try with another sd card, and wait 2 min
Quote this message in a reply

Possibly Related Threads...
Thread Author Replies Views Last Post
LMazda Module Build Data As Built FORD MAZDA Adam0773 70 31,147 12-06-2019, 21:40 PM
Last Post: mondeosweden
  manual request mazda RX8 tecnijl 0 243 22-05-2019, 13:20 PM
Last Post: tecnijl
LFord Ford Mazda 112 gaoan000 20 3,037 28-04-2019, 18:54 PM
Last Post: Automate
LFord Ford IDS 105.01 and MAZDA 104.01 [VMWare] blokers77 29 10,065 03-04-2019, 09:16 AM
Last Post:
  [VMWare] Ford IDS 107.02 & Mazda IDS 107.00 xtac1080 12 2,944 26-03-2019, 17:36 PM
Last Post: Damex37
  Mazda immo off please khamis 2 333 16-03-2019, 17:21 PM
Last Post: khamis
2Wurth Ford IDS install problem TrevvyD 5 341 16-03-2019, 08:26 AM
LMazda Solved ✔ [need] Mazda VCMII Manager roanoke 1 274 05-03-2019, 09:19 AM
Last Post: fantomel
LMazda Looking Mazda cx5 2.2 disel 2014 wiring diagram Virus39 1 285 16-02-2019, 12:46 PM
Last Post: Zamperl
LFord FORD AND MAZDA COLLECTION fantomel 53 34,336 18-01-2019, 20:20 PM
Last Post: SuperStrips

Forum Jump:

Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content