Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Mazda VCM 2 problem
14-05-2019, 09:36 AM,
Post: #1
|
|||
|
|||
Mazda VCM 2 problem
I have original VCM2 mazda, the vci manager dont see it, when i reset it does.
But when i update the firmware and reboot the vcm than manger dont see it anymore. Any ideas? |
|||
14-05-2019, 12:38 PM,
(This post was last modified: 14-05-2019, 12:40 PM by fantomel.)
Post: #2
|
|||
|
|||
RE: Mazda VCM 2 problem
use an older vcm manager and make recovery. preferably with a new SD card (max 2GB). Then remember that after each point of recovery to wait 2min (population of sd)
1. Press the plastic button (to the quiet click) but not much. 2. connect the +12 v supply through connector. (Continue to hold the button) 3. Wait a few seconds, the red light, but you must continue to hold the button. When a beep sounds immediately release the button. 4. Wait about two minutes (visually nothing will happen), connect the USB cord from VCM2 to computer. 5. Start Bosh VCI MANAGER. Once connected, you will see your VCM2 in recovery mode. 6. click on "Restore" button and go to drink coffee, it takes about 40 minutes. 7. after flashing VCM2 automatically reboot. (If, after repeated firmware situation BEEP 1 second, you can try to do firmware lower software version) 8. Wait 2 minutes. 9. unplug all cables from VCM2 10. Restart the computer, then will work ok If you like my post and it helped you please press
|
|||
Reputation: +2 - Renopower [+1] , svvag2000 [+1] | |||
14-05-2019, 12:48 PM,
Post: #3
|
|||
|
|||
RE: Mazda VCM 2 problem
Thank you fantomel, i did this but not help, the 2 minutes i din'd so i will try with another sd card, and wait 2 min
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
FDRS connection problem | sanndo | 13 | 1,118 |
21-04-2024, 20:34 PM Last Post: petr78rus |
|
Mazda 3 transmission issues | koziol | 7 | 97 |
11-04-2024, 15:23 PM Last Post: JorBo |
|
Mazda history information | kowalwalcz | 1 | 80 |
13-03-2024, 06:03 AM Last Post: technoguy |
|
Mazda CX30 2020 Diagnostics does not connect | Nikabov | 3 | 137 |
21-02-2024, 12:40 PM Last Post: pupu144 |
|
Module Build Data As Built FORD MAZDA | Adam0773 | 76 | 41,431 |
13-02-2024, 21:51 PM Last Post: kautuvera |
|
mazda 2 1600 diesel psa engine | guyf4 | 3 | 119 |
12-02-2024, 19:53 PM Last Post: martink550 |
|
mazda 3 ecu dash sync | kitachu | 0 | 75 |
19-01-2024, 15:04 PM Last Post: kitachu |
|
Solved ✔ Mazda 5 only starts with Camshaft sensor Disconnected | zemanely | 5 | 277 |
03-01-2024, 14:17 PM Last Post: zemanely |
|
Ford FDRS Licens Log page problem | das890 | 1 | 442 |
16-11-2023, 06:59 AM Last Post: Untant |
|
Solved ✔ Pinnout ecu mazda 3 2.0 gasoline 150 hp 2009 ecu LF8W | sorin.henea | 1 | 137 |
01-11-2023, 18:52 PM Last Post: sorin.henea |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content