[DAWID042814]

Do you know how to code ambient light in F16?

It depends on iStep but the parameters are almost the same 
On the latest ones use RGB
On the older ones just choose preinstalled

I've tried to change values, but still no luck. May you can help me? Here's my 2018 BDC ncd. (2018 F16 with the latest I-level. 

THX

This NCD is differ from G30 one, thus it's not supported by this ambient light change tool.

BUT, you can use another one my tool: https://cartechnology.co.uk/showthread.php?tid=51247
Just modify following parameters:
AMBIENTE_FARBE_ENSEMBLE_X_LAYER_Y
Where X is an ambient light scheme number in menu and Y is the layer (from top to bottom).

Hi!
Tested it but not working 
I've changed the GROUP_0_FARBE_ENSEMBLE_1 to 59 and AMBIENTE_FARBE_ENSEMBLE_1_LAYER_1-8 to cf(lila) and GROUP_0_FARBE_ENSEMBLE_2 to 59 and AMBIENTE_FARBE_ENSEMBLE_2_LAYER_1-8  to 95(eff Blue). Uploaded to the car but no changes, still the original colors. Checked the BDC file after coding and the values changed, so the coding was success.
Read a post about f15 ambient light coding, but they changed values in 3076 not in 3070. Here's the Post: https://f15.bimmerpost.com/forums/showth...119&page=9

[SuddenlyFast]

Does your tool also change the Sky Lounge color to match the ones chosen with coding?

Also, have you guys found a way to rename the colors in iDrive?

[NeRkO20]

Does anyone have a solution or a new link? The tool is currently offline.

Thx

EDIT: available again

[btvaleks]

When I open the tool I get a blank page. Any ideas why ?