Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

EWS error with Cloned ECU Edc16cp35
19-05-2019, 10:04 AM,
Post: #1
XZBMW  EWS error with Cloned ECU Edc16cp35
HI, i have tryed to clone my ECU EDC16CP35.. Car is 335d with 286HP! I Cloned via BDM and wrote FLS and EPR from Ori Ecu into the Used one.

I Installed it today and tryed to Start the Car.. Car wont Start. I Read Errors and saw that in DDE was the Error EWS Manipulation.


I Try to get 2 Working ecus with Original File and Modified file easy to Switch. How can i get to work the second Ecu?

Thanks for any Reply

Regards
Quote this message in a reply
19-05-2019, 10:20 AM,
Post: #2
RE: EWS error with Cloned ECU Edc16cp35
Have you tried synchronizing using a diagnostic tester?
Quote this message in a reply
19-05-2019, 11:05 AM,
Post: #3
RE: EWS error with Cloned ECU Edc16cp35
No because I'm not sure that work the original dde after sync Ews with used dde.

Regards
Quote this message in a reply
19-05-2019, 11:23 AM,
Post: #4
RE: EWS error with Cloned ECU Edc16cp35
synchronize cas and dde .. every time eeprom is written in dde it is necessary to synchronize ews.

[Image: 29792092_1829236737095550_4115484565478044938_n_s.jpg]
BMW TECHNICAL SERVICE  INFORMATION   - ITALY <> Full map update download all the world
BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM 
Map code  Premium - Motion - Move - Route - Next - Evo ID4
Visit this user's website
Quote this message in a reply
19-05-2019, 12:08 PM,
Post: #5
RE: EWS error with Cloned ECU Edc16cp35
read and write the eeprom from working ecu to the other with programmer not with bdm. bdm will write it bad.

No help for people not give a feedback
Quote this message in a reply
19-05-2019, 13:05 PM, (This post was last modified: 19-05-2019, 13:35 PM by Dealirio.)
Post: #6
RE: EWS error with Cloned ECU Edc16cp35
Than after sync work both dde?


The MPC Files from ori and used ecu are 100% same.. I checked now

Thanks for all reply's
Quote this message in a reply
19-05-2019, 13:07 PM,
Post: #7
RE: EWS error with Cloned ECU Edc16cp35
synchronize cas and dde  you car no has ews 
no problem  only change two bytes 
diference its in micro ecu 
Quote this message in a reply
19-05-2019, 16:10 PM,
Post: #8
RE: EWS error with Cloned ECU Edc16cp35
Now i read eeprom via Bdm again.. and i saw some differences between ori and written eeprom..

I wrote Ori eeprom dump again and read it again, now it match 100% with original. Maybe this was the problem.

I try it in the next days and report back.

Thanks for helping.

Regards
Quote this message in a reply
19-05-2019, 18:17 PM,
Post: #9
RE: EWS error with Cloned ECU Edc16cp35
If you power it on, it will probably write some DTC's to the eeprom, so that's why you get the differences. I don't see the harm in trying to synchronize it personally.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW E83 A1 error - MRS: No message from DSC ... ivanp 22 902 Yesterday, 22:09 PM
Last Post: ivanp
  F15 6WB Retrofit VIN Error moreply 4 174 25-03-2024, 07:24 AM
Last Post: RuleNormaliai
XZBMW F15 Programming Error mcrussell 7 385 20-03-2024, 05:38 AM
Last Post: SweetBMW
  NBT EVO HW4.1 CheckMemory Error moreply 10 460 19-03-2024, 19:43 PM
Last Post: moreply
XZBMW xdrive off with esys without error in dash dankocg 11 2,271 14-03-2024, 13:41 PM
Last Post: Adekborys69
XZBMW G31 LCI Tail Lights retrofit coding error tste1982 27 1,800 10-03-2024, 21:29 PM
Last Post: vanos
  Esys I-Step error adamnewport 10 412 08-03-2024, 09:07 AM
Last Post: Hoborg
XZBMW psdz error furnpick 4 130 05-03-2024, 15:20 PM
Last Post: furnpick
XSMini DSC Module Coding - Error 5DE3 TLG 3 153 24-02-2024, 07:47 AM
Last Post: Stratofortress
  E114A3 Error SeatBelt Acsm Issue after flash Billyjoe69 2 295 20-02-2024, 17:09 PM
Last Post: cedchung

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content