Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Replacing module with Ista+ whats the procedure ?
19-05-2019, 18:45 PM,
Post: #1
|
|||
|
|||
Replacing module with Ista+ whats the procedure ?
I have replaced FRM and ICM with later versions due to some problems so I need to use the Replace modules function of ISTA+, I have never done this before so can someone provide me with a step by step guide please
Thanks |
|||
19-05-2019, 20:25 PM,
Post: #2
|
|||
|
|||
RE: Replacing module with Ista+ whats the procedure ?
Better to work with esys- Perform VO code and flash as needed
|
|||
19-05-2019, 21:45 PM,
Post: #3
|
|||
|
|||
RE: Replacing module with Ista+ whats the procedure ?
|
|||
19-05-2019, 22:11 PM,
Post: #4
|
|||
|
|||
RE: Replacing module with Ista+ whats the procedure ?
the modules are new or used?
Vojnó
Press Thanks and reputation if this post helped you. |
|||
20-05-2019, 04:18 AM,
Post: #5
|
|||
|
|||
RE: Replacing module with Ista+ whats the procedure ?
|
|||
20-05-2019, 07:04 AM,
Post: #6
|
|||
|
|||
RE: Replacing module with Ista+ whats the procedure ?
Then the ISTA make sure do his job!
Vojnó
Press Thanks and reputation if this post helped you. |
|||
20-05-2019, 08:15 AM,
Post: #7
|
|||
|
|||
RE: Replacing module with Ista+ whats the procedure ?
Go to ista, carry out measures plan as usual, tick de-install for the two ecus after ista completes measures plan and presents the job list. Run measures plan, when it reached the modules to be replaced, it will ask you to install the new one. Click continue after installing new one. Very easy....
|
|||
Reputation: +1 - maxwell4321 [+1] | |||
20-05-2019, 09:04 AM,
Post: #8
|
|||
|
|||
RE: Replacing module with Ista+ whats the procedure ?
He talking about ISTA+, not ISTA-P
|
|||
20-05-2019, 14:08 PM,
Post: #9
|
|||
|
|||
RE: Replacing module with Ista+ whats the procedure ?
(20-05-2019, 08:15 AM)willisodhiambo Wrote: Go to ista, carry out measures plan as usual, tick de-install for the two ecus after ista completes measures plan and presents the job list. Run measures plan, when it reached the modules to be replaced, it will ask you to install the new one. Click continue after installing new one. Very easy.... It is not very easy in ISTA+... it was a very easy task in ISTA P I have this same issue now that I have to use the ISTA+ on 17 and newer S1000RR I have a KOMBI for example I want to replace with a salvaged unit with a different VIN than the ECU I am working on. I can get it to the point of ISTA+ making the measurement plan Then as you can see in the posted pictures it indicates to CLOSE the operation. When I reopen the operation I cannot get it to recognize that the part is changed and move on with the programming. |
|||
20-05-2019, 14:13 PM,
Post: #10
|
|||
|
|||
RE: Replacing module with Ista+ whats the procedure ?
With ISTA you can't program in a used KOMBI..
at least on cars, I assume bikes is the same |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content